ИСПОЛЬЗОВАНИЕ ЦИФРОВОГО ПРОТОКОЛА ПРИ СОЗДАНИИ ВРЕМЕННОГО КОНСТРУКЦИЯ ДЛЯ ЗУБНЫХ ИМПЛАНТАТОВ В УСЛОВИЯХ ОДНОСТУПЕНЧАТОГО ИМПЛАНТАЦИЯ И НЕМЕДЛЕННАЯ ЗАГРУЗКА. КЛИНИЧЕСКИЙ СЛУЧАЙ

CC BY f
369-373
71
19
Поделиться
Ризаева, С., Эргашев, О., Жасур, Б., & Ризаева, О. (2022). ИСПОЛЬЗОВАНИЕ ЦИФРОВОГО ПРОТОКОЛА ПРИ СОЗДАНИИ ВРЕМЕННОГО КОНСТРУКЦИЯ ДЛЯ ЗУБНЫХ ИМПЛАНТАТОВ В УСЛОВИЯХ ОДНОСТУПЕНЧАТОГО ИМПЛАНТАЦИЯ И НЕМЕДЛЕННАЯ ЗАГРУЗКА. КЛИНИЧЕСКИЙ СЛУЧАЙ. Медицина и инновации, 1(4), 369–373. извлечено от https://inlibrary.uz/index.php/medicine_and_innovations/article/view/740
Севара Ризаева, Ташкентский государственный стоматологический институт

к.м.н., профессор. Кафедра факультетской ортопедии

Отабек Эргашев, Андижанский государственный медицинский институт

помощник. Отделение стоматологической хирургии

Бабаджанов Жасур, Ташкентский государственный стоматологический институт

Кафедра факультетской ортопедии. клинический ординатор первого года обучения

Ойбегим Ризаева, Ташкентский государственный стоматологический институт

студент пятого курса. Кафедра факультетской ортопедии

Crossref
Сrossref
Scopus
Scopus

Аннотация

Annotation: the active introduction of innovative technologies, such as three-dimensional printing and digital scanning in dentistry causes a great interest from dentists of various specialties. The article describes a clinical case that shows the opportunities of a digital protocol in dental implantology and prosthodontics. Aim: to assess the opportunities of the clinical use of temporary crowns for immediate loading in the digital protocol. Conclusions. The emergence of innovative technologies in dentistry is currently arousing active interest from the dental community. 3D modeling and printing arc becoming more widespread in our daily life. A thorough study of this method is undoubtedly prospectful, but requires deepimmersion in the problem, clinical and laboratory observations of structures made of materials certified for long-term use.

Похожие статьи

background image

369

2.

Арутюнов А.С. Оптимизация восстановления зубов штифтовыми конструкциями: Автор. дис…

канд.мед.наук. – М., 2003.- 23 с.
3.

Арутюнов С.Д., Лебеденко И.Ю., Ковальская Т.В. CEREC система: керамические вкладки,

изготовленные методом компьютерного фрезерования: Методические рекомендации к практическим
занятиям для студентов стоматологических факультетов и врачей-стоматологов. - М., 1999. - 13 с.
4.

Тихонов А.И. Клинико-биомеханический анализ эффективности керамических штифтовых

вкладок при восстановлении разрушенной коронки зуба: Автор. дис…канд. мед. наук. – М.,2017.–27 с.
5.

Фисюнов А.Д., Рубникович С.П. Применение композитно-армированной культевой штифтовой

вкладки при протезировании полного дефекта коронковой части зуба // Стоматология. Эстетика.
Инновации. - 2019. -Т. 3.- № 3.- С. 292-302.
6.

Фисюнов А.Д., Рубникович С.П. Применение композитно-армированных культевых штифтовых

вкладок для замещения дефектов твердых тканей зубов // Вестник Витебского государственного
медицинского университета. -2018. -Т. 17.- № 1.- С. 91-99.
7.

Хабилов Н.Л., Дадабаева М.У., Мун Т.О., Хабилов Б.Н. Диоксид циркония - один из современных

стоматологических материалов // Stomatologiya. - 2017.- № 2.- С. 107-110.
8.

Харах Я.Н., Демишкевич Э.Б. Метод рентгенологической оценки анатомо-топографических

особенностей̆ полости зуба // Российская стоматология. -2017.- Т. 10. № 1.- С. 63-64.
9.

Tian T. Aspects of Adhesion Between CAD/CAM Ceramics and Resin CementsJan // Open Dissertation

Press. - 2017. - 258p.
10.

Zaytsev, D. Mechanical properties of human enamel under compression: On the feature of calculations //

Materials Science and Engineering C. - 2016. - Vol. 62. - P. 518 523.
11.

Zimmermann M., Mehl A., Mormann W.H., Reich S. Intraoral scanning systems - a current overview

// Int. J. Comput. Dent. - 2015.- №18 (2). - P.101-129.

THE USE OF DIGITAL PROTOCOL IN THE CREATION OF A TEMPORARY

STRUCTURE FOR DENTAL IMPLANTS IN THE CONDITIONS OF SINGLE-STAGE

IMPLANTATION AND IMMEDIATE LOADING. CLINICAL CASE

Rizaeva Sevara Mirgulamovna

– ScD, Professor

1

Ergashev Otabek Zaylobiddin ugli

– assistant

2

Babadjanov Jasur Bakhtiyarovich

– a first-year clinical resident

1

Rizaeva Oybegim Nazimovna

– a fifth-year student

1

1. Tashkent state dental institute, Department of Faculty prosthodontics

2. Andijan state medical institute, Department of Dental surgery

Annotation:

the active introduction of innovative technologies, such as three-dimensional

printing and digital scanning in dentistry causes a great interest from dentists of various specialties.
The article describes a clinical case that shows the opportunities of a digital protocol in dental
implantology and prosthodontics.

Aim

: to assess the opportunities of the clinical use of temporary crowns for immediate loading

in the digital protocol.

Conclusions

. The emergence of innovative technologies in dentistry is currently arousing

active interest from the dental community. 3D modeling and printing are becoming more widespread
in our daily life. A thorough study of this method is undoubtedly prospectful, but requires deep

UDC: 616.314-089.843-059-004.6


background image

370

immersion in the problem, clinical and laboratory observations of structures made of materials
certified for long-term use.

Key

words:

intraoral

scanner,

scanning,

РММА,

CAD/CAM,

dentistry,

3D printer, prosthodontics, prosthetics, temporary crowns, long-term structures.

Introduction:

The digital methods, used in the framework of dental examination, have

become a new standard of quality. 3D visualization of the dentition allows the clinician to create a
virtual model of the jaw apparatus, on the basis of which the doctor is able to predict and calculate
the stages of treatment. It is a modern method of forming a clinical picture, differing from others by
high level of accuracy and speed of data processing.

Intraoral scanners are used to obtain a digital version of dental impression. The devices display

a 3D projection on a computer screen. The technology is based on the direction of light rays onto the
studied object and obtaining their reverse reflection, which allows to form a three-dimensional
pattern. Practice shows that intraoral scanning is a procedure that is convenient for both doctors and
patients.

Application and purposes

Digital scanning devices are used in various fields of dentistry. The priority is the production

of three-dimensional models necessary for the aesthetic and functional restoration of the dentition.

The creation of artificial crowns, implants, correctors and other devices requires the highest

precision, which excludes the manual adjustment and discomfort during the use. Digital prints allows
you to:

• Plan operations for the installation of dental implants using surgical templates;
• Model and visualize the future dentition, coordinating the results of treatment with the

patient;

• Calculate changes at all stages of orthodontic recovery, reducing costs and increasing the

corrective effect of wearing braces or aligners.

Digital processing minimizes a human error. Therefore, it increases the probability of

achieving the desired treatment results.

Fig. 1. ТRIOS – by 3Shape.

The principle of operation.

Image sensors installed in the scanner transmit the image to the

software which is installed on the doctor's computer. After the created cloud of points have been
processed, a three-dimensional model is formed from it. The model accurately shows the anatomical
specifics of the structure of the dentoalveolar apparatus. The analysis and processing of the virtual


background image

371

model greatly simplifies the doctor's work, providing the option of making a physical copy of the
prototype on a 3D printer.

Manufacturers and main advantages.

The list of companies that make up the group of

leaders in the intraoral scanner market includes 6-7 brands. The most popular ones are:

iTero by Align Technology, an American company which produces Invisalign correctors;

Cerec by Sirona, a German company, allows to obtain the data for the manufacture of ceramic

crowns and implants;

TRIOS by 3Shape, European company (Fig.1).
Because intraoral 3D scanning is becoming more and more popular, various types of

equipment are presented in modern clinics. Digital scanners have taken the place of silicone and
plaster impressions, which were as a rule too uncomfortable for patients. The examination takes a
little more time; however, it allows you to get an error-free model, excluding the influence of the
human factor, as well as the effect on the tissues of the oral cavity. The transfer of data for processing
is online - the 3D model is stored on digital media, and, if necessary, can always be restored again.
Moreover, it is worth noting only the difficulty in analysis of hard-to-reach places as the
disadvantages of the technology. The placement of subgingival structures involves the need to define
the gingival line from the inside, which is not an easy task to scan. Nevertheless, popular scanners
guarantee the high quality optical impressions.

Aim:

to assess the opportunities of the clinical use of temporary crowns for immediate loading

in the digital protocol.

Materials and methods:

the object of our investigation was patient N., 40 with

the diagnosed generalized periodontitis of high severity and III degree of tooth mobility
(Fig. 2).

Fig. 2.

Orthopantomogram of the patient N., 40.


After the examination the treatment plan have been composed. The removal of the teeth from

the upper jaw with the single-stage implantation and immediate loading have been carried out.

Eight implants by IMPRO implantation system (Germany) were installed. 4 implants with a

torque of 35 N were closed under a plug, and multi-units with scan markers were installed on 4
implants with a torque of 50 N, after all intraoral scanning of the superior alveolar process was
performed (Fig. 3).


background image

372

Scan-files were sent to the dental laboratory via e-mail service. Then, a dental technician,

using virtual impressions in the EXOCAD program, modeled the future temporary construction,
which was sent online to the milling center where our temporary construction was made of PMMA.

3 days after the operation, our patient was able to return to a full life, which is an important

component for us at this stage of the restoration of the dentition (Fig. 4).

Fig. 3.

The scan of the upper alveolar process with scan markers.

Fig. 4.

Temporary prosthodontic structure based on implants

which are made of PMMA.

Results and discussion:

currently, there can be noticed an increasing influence of three-

dimensional visualization and modeling on all aspects of dentistry. The use of digital data allows a

clinician

to

create

precise

and

complex

geometric

shapes.

We consider that it would be inconvenient for the doctor and uncomfortable and painful for the patient

to take impressions immediately after surgical stage in this clinical case. However, the digital method

of temporary restoration of the dentition on implants is absolutely painless, more comfortable, more

accurate and undoubtedly faster. That is the reason why it significantly reduces the manufacturing

time of such structures, as well as the time spent by a dentist and dental technician.

Литература/References:

1.

Аддиктивные технологии как технологическая инновация [Электронный ресурс].

Режим доступа:

http://ekonomika.snauka

. ru/2018/01/15666 дата обращения (25.03.2019).


background image

373

2.

Наумович С.С. Cad/cam системы в стоматологии: современное состояние

и перспективы развития / С.С. Наумович, А.Н. Разоренов // Современная стоматология. -
2016.
3.

Хуранов А.Ш., Цаликова Н.А., Гончарова О.П. Определение точности сканирования

тестовых объектов с помощью внутриротовой 3D камеры Российской CAD/CAM системы
«OPTIKDENT» // Dental forum Материалы четвертой всероссийской конференции
Современные аспекты профилактики стоматологических заболеваний». - 2012. - №5.- С. 133.
4.

Цаликова Н.А. Оптимизация лечения пациентов с применением CAD/CAM технологий

в клинике ортопедической стоматологии // Автореферат дис. д-ра мед. наук.- Москва, 2013.-
49 с.
5.

3D-печать в стоматологии на примере NextDent [Электронный ресурс]. Режим

доступа:

https://habr.com/ru/company/top3dshop/blog/399271

УДК: 616.314-089.616.843-311.2-616.12:616.379-008.64

ИЗМЕНЕНИЯ МИКРОЦИРКУЛЯЦИЯ ПРОТЕЗНОГО ЛОЖА ПОСЛЕ

ПРОТЕЗИРОВАНИЯ У БОЛЬНЫХ САХАРНЫМ ДИАБЕТОМ 2 ТИПА

Р.З. Нормуродова

1

, М.Т. Сафаров

2

, М.У. Дадабаева

3

, Ф.А. Хусанбаева

4

Ташкентский государственный стоматологический институт,

кафедра госпитальной ортопедической стоматологии

Ассистент

1

ruxsoran@mail.ru;

2

доцент

muradtashpulatovich@gmail.com

3

доцент

mukhlisa_d@mail.ru;

4

ассистент

husanbaevaferuza7@gmail.com

АННОТАЦИЯ

Сахарный диабет и наблюдаемые на его фоне патологические изменения полости рта

обуславливают необходимость индивидуального клинического подхода при протезировании
пациентов с данной общесоматической патологией. Микроциркуляционные нарушения,
микроангиопатии, дисбиоз и жизнедеятельность патогенной микрофлоры требуют изучения
влияния процесса протезирования и самих ортопедических конструкций на различные
физиологические показатели (уровень капиллярного потока, скорость кровотока и другие
реологические показатели крови) протезного ложа. Оценка состояния тканей протезного ложа
позволит выбрать наиболее оптимальный материал и вид ортопедической конструкции. В ходе
исследования было выявлено, что в области пародонта зуба с дефектом коронковой части
ухудшаются все параметры микроциркуляции. В процессе протезирования наиболее
значимые изменения наблюдаются после препарирования опорных зубов и после фиксации
протеза. Так, после препарирования зубов под несъёмную ортопедическую конструкцию было
обнаружено снижение сосудистого тонуса, а улучшение кровотока и вазомоторной активности
сосудов наблюдалось только через 6 месяцев после фиксации протеза.

Библиографические ссылки

Аддиктивные технологии как технологическая инновация [Электронный ресурс]. Режим доступа: http://ekonomika.snauka. ru/2018/01/15666 дата обращения (25.03.2019).

Наумович С.С. Cad/cam системы в стоматологии: современное состояние

и перспективы развития / С.С. Наумович, Л.Н. Разоренов // Современная стоматология. -2016.

Хуранов А.III., Цаликова Н.А., Гончарова О.П. Определение точности сканирования тестовых объектов с помощью внутриротовой 3D камеры Российской CAD/CAM системы «OPTIKDENT» И Dental forum Материалы четвертой всероссийской конференции Современные аспекты профилактики стоматологических заболеваний». - 2012. - №5.- С. 133.

Цаликова Н.А. Оптимизация лечения пациентов с применением CAD/CAM технологий в клинике ортопедической стоматологии // Автореферат дис. д-ра мед. наук.- Москва, 2013.-49 с.

ЗО-печать в стоматологии на примере NextDent [Электронный ресурс]. Режим доступа: https://habr.com/ru/company/top3dshop/blog/399271

inLibrary — это научная электронная библиотека inConference - научно-практические конференции inScience - Журнал Общество и инновации UACD - Антикоррупционный дайджест Узбекистана UZDA - Ассоциации стоматологов Узбекистана АСТ - Архитектура, строительство, транспорт Open Journal System - Престиж вашего журнала в международных базах данных inDesigner - Разработка сайта - создание сайтов под ключ в веб студии Iqtisodiy taraqqiyot va tahlil - ilmiy elektron jurnali yuridik va jismoniy shaxslarning in-Academy - Innovative Academy RSC MENC LEGIS - Адвокатское бюро SPORT-SCIENCE - Актуальные проблемы спортивной науки GLOTEC - Внедрение цифровых технологий в организации MuviPoisk - Смотрите фильмы онлайн, большая коллекция, новинки кинопроката Megatorg - Доска объявлений Megatorg.net: сайт бесплатных частных объявлений Skinormil - Космецевтика активного действия Pils - Мультибрендовый онлайн шоп METAMED - Фармацевтическая компания с полным спектром услуг Dexaflu - от симптомов гриппа и простуды SMARTY - Увеличение продаж вашей компании ELECARS - Электромобили в Ташкенте, Узбекистане CHINA MOTORS - Купи автомобиль своей мечты! PROKAT24 - Прокат и аренда строительных инструментов