INTERNATIONAL MULTIDISCIPLINARY JOURNAL FOR
RESEARCH & DEVELOPMENT
SJIF 2019: 5.222 2020: 5.552 2021: 5.637 2022:5.479 2023:6.563 2024: 7,805
eISSN :2394-6334 https://www.ijmrd.in/index.php/imjrd Volume 12, issue 08 (2025)
78
DIGITALIZATION AND AUTOMATION OF CERTIFICATION PROCESSES
Esanova Shazoda
Associate Professor, Andijan State Technical Institute
Xursanoy Azizbek kizi
Student at Andijan State Technical Institute
Abstract:
This article examines the main purpose of certification - the requirements for
certification of products and services and their quality management, the content, nature and
history of development of the regulatory and legal framework of certification, international
standards and national legislation.
Keywords:
Certification, ГОСТ standards, Automation, Product safety, Certification process,
Regulatory documents, Accreditation Certification system, Quality assessment
Introduction.
The basics of certification and quality management include the organizational,
methodological and legal aspects of certification in international organizations and in the
Republic of Uzbekistan, as well as certification rules, implementation mechanisms and quality
management sections. It should be noted that certification and the issues of implementing the
quality system and certification and research practices of accreditation bodies are directly
related. The design of automated machine systems is based on their structural and layout
options, principle schemes, calculations of efficiency, reliability, and cost-effectiveness. The
level of automation of mechanical engineering is currently aimed at creating automated
machine systems, covering various stages of production - from the preparation of blanks to
assembly.
Various products manufactured in industrial enterprises must meet certain indicators. These
indicators must comply with certain established requirements. Conformity, in turn, requires that
products or services comply with the indicators specified for these products or services in a
certain standard or other regulatory documents.
Conformity certification is possible. So what is the concept of certification? Certification is
understood as an activity that confirms the compliance of a product with a specific standard or
technical document with the required reliability. The term conformity includes compliance with
all the requirements established for a product, process, service. There are three types of
conformity 23 - declaration of conformity, attestation of conformity, certification of conformity.
The certification process is understood as an activity carried out to confirm that a product / item,
good / or service meets the requirements of a specific standard or technical condition, and as a
result of this activity, an appropriate document is issued - a certificate, which assures the
consumer that the product / item, good / meets the established requirements. A certification
system is a system that has rules of procedure and management for conducting certification
activities of conformity. A national certification system is a system operating at the state level,
which has its own rules of procedure and management for conducting certification. The
"Uzstandar" Agency is the national certification div of the Republic of Uzbekistan and, in
accordance with current legislation, carries out the following activities: - implements state
policy in the field of certification; - establishes general rules for conducting certification,
publishes official information about them; - develops draft programs for improving the
certification system and submits them for discussion by the Government; - adopts decisions on
joining international certification systems in agreement with the Cabinet of Ministers of the
INTERNATIONAL MULTIDISCIPLINARY JOURNAL FOR
RESEARCH & DEVELOPMENT
SJIF 2019: 5.222 2020: 5.552 2021: 5.637 2022:5.479 2023:6.563 2024: 7,805
eISSN :2394-6334 https://www.ijmrd.in/index.php/imjrd Volume 12, issue 08 (2025)
79
Republic of Uzbekistan; - concludes agreements on mutual recognition of certification results; -
acts on behalf of the Republic of Uzbekistan in relations with other countries and in
international organizations on certification issues, - determines the list of products subject to
mandatory certification. Basic rules for the national certification system (UzDst 5.0) The terms
and definitions used in this course are in accordance with the standards ISO/IES 2, Uz DSt ISO
9000:2016, Uz DSt 5.0, and the following terms and definitions are used in proportion:
Certification is a process in which an intermediary, a third party, provides written testimony and
acknowledges that a product, process, or service meets a specified level of requirements.
Various products manufactured in industrial enterprises must meet certain performance criteria.
These performance criteria must be in accordance with/correspond to certain specified
requirements. Conformity, in turn, requires that products or services meet the performance
criteria specified for these products or services in a specific standard or other regulatory
document.
The design of automated machine systems is based on their structural and layout options,
principle diagrams, and calculations of efficiency, reliability, and cost-effectiveness.
The level of automation is currently aimed at creating automated machine systems, covering
various stages of production - from the preparation of blanks to assembly. In this case, the focus
of automation is based on the transition from mass production to serial production. This, in turn,
is associated with the automation and mechanization of auxiliary technological processes and
the solution of economic, organizational and management system issues. Complex automation
involves the use of common methods at each stage of their automation, using methods of
constantly improving technical equipment (control systems and programs in a digital program;
from simple mechanisms to electronic control systems). This, in turn, makes it possible to
design several types of automatic lines. Thus, the scientific basis of research in the design and
operation of machines and mechanisms in mechanical engineering, which determines the
development of technical progress, is manifested.
Conclusion
National certification system of the Republic of Uzbekistan The following types of certification
of the certification system are implemented in the Republic of Uzbekistan: - Mandatory
certification; - Voluntary certification; Mandatory certification includes products that are
manufactured, imported and exported, and are subject to certification, included in a special list
approved by the Cabinet of Ministers of the Republic of Uzbekistan. The above list includes
products or services for which requirements are established in regulatory documents on the
safety of life, health and property of citizens, environmental protection, interoperability and
compatibility. In addition to this list, similar requirements may be imposed on certain services
and products in accordance with the Laws adopted by the Oliy Majlis, and on the basis of
presidential decrees. Voluntary certification may include services or products not included in
the list in accordance with the Laws of the Republic of Uzbekistan, Presidential Decrees, and
Government Resolutions, in which case certification is carried out voluntarily at the initiative of
the manufacturer, supplier or consumer (hereinafter referred to as the applicant). The expression
"digitalization
and
automation
of
certification
processes"
is
understood
as
follows:Meaning:This expression means the conversion of processes performed to confirm the
quality (certification) of products, services or systems into digital form using computer
technology (digitization) and making them automatically controlled by software tools
(automation).In simpler terms:Certification work (for example, submitting documents,
INTERNATIONAL MULTIDISCIPLINARY JOURNAL FOR
RESEARCH & DEVELOPMENT
SJIF 2019: 5.222 2020: 5.552 2021: 5.637 2022:5.479 2023:6.563 2024: 7,805
eISSN :2394-6334 https://www.ijmrd.in/index.php/imjrd Volume 12, issue 08 (2025)
80
conducting inspections, issuing results) is carried out on a computer, not on paper, and is
performed automatically, as far as possible, without human intervention.
References:
1. Decree of the President of the Republic of Uzbekistan Shavkat Mirziyoyev dated February 7,
2017 on the Strategy of Actions for the Further Development of the Republic of Uzbekistan.
2. Resolution of the President of the Republic of Uzbekistan No. PQ-2935 dated April 28, 2017
"On measures to improve the activities of the Uzbekistan Agency for Standardization,
Metrology and Certification".
3. Ismatullaev PR, Maksudov AN, Abdullaev AX, Akhmedov BM, A'zamov AA Metrology,
standardization and certification. <<Uzbekistan» Tashkent-2001.
MN , Boyko SR, Khakimov O.Sh., Khvan VI Standardization, metrology, certification and
quality. Study manual . Tashkent , SMSITI , 2008. – 267 .
5. A. I. Dashchenko, Automation of processes mashinostroeniya / pod ed. M. : Vyssh. ntk,,
1991. — 480 p.
6. I. S. Blyakherov, G. M. Varyash, A. A. Ivanov and Dr. Avtomaticheskaya zagruzka
tehnologicheskikh mashin: Spravochnik/ Pod obshch. ed. I. A. Klusova. — M.:
Mashinostroenie, 1990.
— 400 p.
7. Bedrin V.M., Bedrina A.V. Obzor methodov i ustroystv avtomaticheskogo orientirovaniya
detaley pri sborke. "Sborka v mashinostroenii, priborostroenii", 2000, No. 2, p. 7-21.
8. Volchkevich L.I. Automation of production processes: Ucheb. posobie dlya vuzov.- 2-e izd.,
ster.- M.: Mashinostroenie, 2007.- 379p.
