Authors

  • Turakhodjaev N.D.
    Professor, Head Of Foundry Technologies Department, Tashkent State Technical University, Uzbekistan
  • Abdullaev K. Kh
    Docent, Department Of Machinery Technology Namangan Engineering Construction Institute, Uzbekistan
  • Saidmakhamadov N.M.
    PhD Student, Department Of Foundry Technologies, Tashkent State Technical University, Uzbekistan
  • Saidkhodjaeva Sh. N.
    Senior Teacher, Department Of Foundry Technologies, Tashkent State Technical University, Uzbekistan
  • Toshmatova Sh.T
    Teacher, Department Of Foundry Technologies, Tashkent State Technical University, Uzbekistan

DOI:

https://doi.org/10.37547/tajet/Volume03Issue01-12

Keywords:

High-chromium white iron nickel carbide

Abstract

This article examines the effect of alloying elements of high chromium cast iron on the corrosion resistance and hardness of the alloy by heat treatment. Carbide formation and elongation strength limits were also analyzed depending on the amount of chromium and nickel. 

References

Turakhodjaev N. D. et al. ANALYSIS OF DEFECTS IN WHITE CAST IRON //Theoretical & Applied Science. – 2020. – №. 6. – С. 675-682.

Turakhodjaev N. et al. EFFECT OF METAL CRYSTALLATION PERIOD ON PRODUCT QUALITY //Theoretical & Applied Science. – 2020. – №. 11. – С. 23-31.

Тураходжаев Н. Д. и др. ОҚ ЧЎЯННИНГ БАРҚАРОР СТРУКТУРАСИНИ ТАЪМИНЛАЙДИГАН ТЕХНОЛОГИЯ ИШЛАБ ЧИҚИШ ВА УНИ ИШЛАБ ЧИҚАРИШ ШАРОИТИДА ЖОРИЙ ҚИЛИШ //Journal of Advances in Engineering Technology. – 2020. – №. 1.

Bekmirzaev S., Saidmakhamadov N., Ubaydullaev М. Obtaining sand-clay casting". Theory and practice of modern //Russia. – 2016. – №. 4 (12). – С. 112.

Djahongirovich T. N., Muysinaliyevich S. N. Important features of casting systems when casting alloy cast irons in sand-clay molds //ACADEMICIA: An International Multidisciplinary Research Journal. – 2020. – Т. 10. – №. 5. – С. 1573-1580.

Бекмирзаев Ш., Саидмахамадов Н., Убайдуллаев М. ПОЛУЧЕНИЯ ЛИТЬЕ В ПЕСЧАНО-ГЛИНИСТЫЕ МЕТОДОМ //Теория и практика современной науки. – 2016. – №. 6-1. – С. 112-115.

Саидмахамадов Н. и др. ОБЩАЯ ТЕХНОЛОГИЯ ПРОИЗВОДСТВА ПОРОШКОВО КОНСТУКЦИОННЫХ МАТЕРИАЛОВ //Экономика и социум. – 2019. – №. 4. – С. 673-680.

Саидмахамадов Н. и др. ТЕХНОЛОГИЯ ПРЕДОТВРАШЕНИЯ ПОР В ОТЛИВАХ //Экономика и социум. – 2019. – №. 4. – С. 661-672.

Саидмахамадов Н., Хайдаров У., Эгамбердиев Б. УЛУЧШЕНИЕ ПОДГОТОВКИ ТЕХНОЛОГИЙ МЕТОДОМ СПЕЦИАЛЬНОГО СЛИВАНИЯ //Экономика и социум. – 2019. – №. 4. – С. 651-660.