Theoretical Analysis Of The Motion Of Raw Cotton With Uniform Feeder In A Cotton Cleaner
Keywords:
Abstract
In this scientific work, a theoretical analysis of the movement of raw cotton with a uniform feed of the feeder is considered, the cleaning machines used at the cotton ginning plant.
Similar Articles
-
Hazrati Imam Architecture The Complex Is A Holiday Of Our People
The American Journal of Engineering and Technology: No. 11 (2020) / Abdurakhmanov Ulugbek Arabdjon Ogli , Хaydarov Abduхalil Mutalib Ogli , Qodirov Giyosjon Mirzajonovich, -
Analysis Of Methods For Increasing The Efficiency Of The Use Of Crushing Working Bodies Of Crushers
The American Journal of Engineering and Technology: No. 08 (2021) / Batırbay Kosımbetov, -
Development Of The Angren Coal Deposit, Prone To Spontaneous Combustion
The American Journal of Engineering and Technology: No. 11 (2020) / Akbarov Tahirjan Gulyamovich , Israilov Mansurjon Abdusamatovich , Makhmudov Dilmurod Rakhmatjonovich , Mardonov Isomiddin Nurullayvich , -
Improvement Of The Technology For Extracting Tungsten Industrial Products From The Stale Tailings Of The Ingichkin Factory
The American Journal of Engineering and Technology: No. 02 (2021) / Marhamat Akramovna Mutalova, Durdona Abdukarim Kizi Abdujabborova, Gulmira Nematzhonovna Fayzieva, Muazzam Gozikul Kizi Nazirkulova, -
THE PHILOSOPHY OF HARMONY IN THE MAJOR OF THE CROSS
The American Journal of Engineering and Technology: No. 04 (2022) / Madina S. Saipova, -
Simulation Of Heat And Mass Transfer While Drying Of Spherical Bodies Under Conditions Of Natural Convection In A Solar Mobile Drying Unit
The American Journal of Engineering and Technology: No. 07 (2020) / Dildora Jumabaevna Nurmatova,, Botir Egamberdievich Khayriddinov, Nodir Sulaymonovich Kholmirzaev, -
Analysis Of Drilling Speed Of Cine Drill Bits
The American Journal of Engineering and Technology: No. 10 (2021) / Bakhtiyor Nusratovich Baratov, Javokhir Buriyevich Toshov, -
The Issues Of Beaming Yarn Bobbins And The Policies Of Eliminating Them
The American Journal of Engineering and Technology: No. 05 (2021) / Kodirova Ozoda Jaloldin’s Daughter, Azizov Inomjon Rashidovich, -
On The Technogenic Impact Of Industrial Enterprises Of The Almalyk Region On The Ecological And Hydrogeological Conditions Of The Akhangaran River Valley
The American Journal of Engineering and Technology: No. 12 (2020) / Fidaev D.T., Isomatov Yu.P., -
Specific Features Of Material Composition Of Jurassic "Sandy" Horizons Of Sudochy Deflection And Their Oil And Gas Potential
The American Journal of Engineering and Technology: No. 02 (2021) / Abdurakhmonov Behzod Abdurasul Ugli, Bekmanov Nigmat Utegenovich,
References
Uzakov R.E. et al. “Processing of raw cotton at harvesting points” (review)., Tashkent, UzNIINTI, 1981, pp. 70-75
Gulidov N.G. “Study of the causes of malformation during fiber separation and the development of measures to prevent the formation of defects” (report)., Topic 25. Tashkent, TsNIIHprom, 1951, pp. 50-56
Uldyakov A.I. and others. "Improving the cleaning process of raw cotton machine harvest." (review)., Tashkent, UzNIINTI, 1977, p. 40
Handbook of primary cotton processing. I, II volume, ed., "Mehnat", Tashkent, 1994
Miroshnichenko G.I. Fundamentals of designing machines for primary processing of cotton. M .: Engineering, 1972, p.127-201
Lugachev A.E. "Development of the theoretical foundations of nutrition and cleaning of cotton in relation to the in-line technology of its processing." Abstract of dissertation for the degree of Doctor of Technical Sciences Tashkent, 1998.
ObidovAvazbek, SultonovMirzaolim, MuhksinovIbrohim, The theoretical studies of the cultivation ofthree cotton seeds along the plainEngineering, 2018, 10, 514-520 http://www.scirp.org/journal/eng
Kaybnazarov E. E., Sultanov O. S., Muhsinov I.I. Theoretıcal Analysıs of the Movement of Raw Cotton ın Unıform Feeder Feed ın the New InstallatıonInternational Journal of Advanced Science and Technology Vol. 29, No. 7, (2020), pp. 7970-7974
Umarov A.A., K. Ortikova, A.U. Sarimsakov, D. Kurbanov. Analysis of the control of manual and automatic regulation of the saw gin feed rollers. Scientific journal "Universum: technical sciences". Part 2. Moscow, 2020. - 9 (78). 22-26. https://7universum.com/ru/tech/archive/item/10693
Umarov A., Ortikova K., Sarimsakov A. Analysis of Speeds of Cylinders of Saw Gins and Linters and Determination of Critical Frequencies for them. Scientific Research Publishing, Engineering, 2020, 12, 715-722. DOI: 10.4236/eng.2020.1210050.
Umarov A., Akhmedkhodzhaev Kh.,Sarimsakov A.,Kenjaeva M.The Saw Gin Stand with Adjustable Movement of the Roll Box. Scientific Research Publishing, Engineering, 2018, 10, 486-494. http://www.scirp.org/journal/eng, https://doi.org/10.4236/eng.2018.108034.
Sarimsakov A.,Muradov R., Umarov A., Kurbanov D. Movement Differential Equation of Seed Roller which Has Been Installed Stake Accelerator on the Roll Box of Gin Machine. Scientific Research Publishing, Engineering, 2018, 10, 521-529. http://www.scirp.org/journal/eng, https://doi.org/10.4236/eng.2018.108038.
Kh.Axmedxodjayev, A.Umarov, K. Ortiqova. Investigation of the Ginning Process on ДП Series Saw Gin Stands. Scientific Research Publishing, Engineering, 2019, 11, 523-530 http://www.scirp.org/journal/eng.
A.U. Sarimsakov, D. M. Kurbonov, Sh., H. Halikov. The study of the crucible rotation of raw materials with a practical way. Scientific and practical journal "Economy and Society" No. 12 (67) -2019 (December) https://iupr.ru/nauchno_prakticheskiy_zhurnal__ekonomika_i_socium___12_67__2019_g___dekabr_/.
