Analysis Of Fibrous Wastes Generated During Spinning Of Cotton Fiber In The Re-Spinning System
Keywords:
Abstract
This article discusses the analysis of indicators for the detection of waste in the production of cotton yarn. Indicators for analysis and research were used to determine the properties of fibrous wastes. The results of HVI-1000 equipment were analyzed to determine the quality of toll waste. The amount of fiber suitable for spinning from fiber wastes has been determined. The analysis of the theory of fibrous wastes formed during spinning of cotton yarn in the recycling system is shown.
Similar Articles
-
Power Evaluating In Less Created Nations: Joining Financial Productivity And Value Targets
The American Journal of Engineering and Technology: No. 06 (2020) / Emmanuel Okonkwo, Nasifuddeen Adeyemi, -
ACCELEROMETER ANALYSIS AND STATISTICAL MEASUREMENT OF GASOLINE ENGINE FUEL OCTANE NUMBERS: A STUDY
The American Journal of Engineering and Technology: No. 05 (2023) / Mohd Azazi Hamzah , Ahmad Habibah Ramli, -
MODELING THE COMMON RAIL FUEL INJECTION SYSTEM OF A FOUR-CYLINDER HYDROGEN-FUELED ENGINE
The American Journal of Engineering and Technology: No. 10 (2023) / Rosli M. Rahman, -
EXPLORING FUEL OCTANE NUMBERS: A COMPREHENSIVE ANALYSIS USING ACCELEROMETER-BASED ASSESSMENT AND STATISTICAL METRICS
The American Journal of Engineering and Technology: No. 06 (2023) / Mohd Irman Hamzah, Ahmad Habibah Ghani, -
ENHANCING COMMUNITY RESILIENCE: ELECTRIC SCHOOL BUS V2G AS PORTABLE ENERGY SOLUTION
The American Journal of Engineering and Technology: No. 03 (2024) / Ebrahim Karan, -
Analysis Of The Results Of Natural Studies Of Hydraulic Turbines Of Hydroelectric Power Stations
The American Journal of Engineering and Technology: No. 02 (2021) / Daniyar Paluanov , Fayzullokhuja Abboskhujayev , -
COMPARISON OF MPPT ALGORITHMS FOR PV SYSTEM USING SINGLE DIODE AND THEVENIN EQUIVALENT MODELS
The American Journal of Engineering and Technology: No. 04 (2022) / Ali Haider Dahash , Anas Lateef Mahmood , -
OPTIMIZING CAPACITIVE ENERGY STORAGE FOR LOAD FREQUENCY CONTROL IN WIND-DIESEL HYBRID POWER PLANTS: A NOVEL APPROACH WITH IMPERIALIST COMPETITIVE ALGORITHM
-
The Prospects Of The Construction Of Hydroelectric Power Plants In Uzbekistan And The Issues Of Increasing Their Number And Widespread Use
The American Journal of Engineering and Technology: No. 11 (2020) / Azamov Saidikrom Saidmurodovich, -
Development Of A Principal Diagram Of A High-Efficiency Coefficient Of A Frequency Inverter
The American Journal of Engineering and Technology: No. 12 (2020) / Tursunov Azizbek Shokirjon O'g'li, Abduraximov Dostonbek Raximjon O’g’li,
References
Okhunboboev O.A; Ergashov M. Theory of calculation of the results of the basis of silk machines: Tashkent: Science and technology, 2010. –p. 224.
Rabotnov Yu.N. Mechanics of a deformable solid. Moscow: Science. 1988, - p. 712.
Sedov L.I. Continuum mechanics. Moscow: Nauka, 1984.
Ovchinsky A.S; Kopiev I.M; Sakharova E.N; Moskvitin V.V. Redistribution of stresses upon breaking of brittle fibers in metal composite materials. Polymer engineering. 1977.
State standard of Uzbekistan №604-2016.
USTER STATISTICS - 2013 International Classification of Quality Indicators of Cotton Yarns.
Decree of the President of the Republic of Uzbekistan PD-5285 “On measures to accelerate the development of the textile and knitwear industry.” Tashkent: December 14, 2017.
Stretching tool of the spinning machine. Patent for a utility model of the State Patent Office of the Republic of Uzbekistan. FAP 2014 0156.2018y.
Yang Jing, XuBojunXie, Chunping Liu, Xinjin, Comparison of fibre migration in different yarn bodies/ Fibre end Textile Indian (IJFTR), Dec 2018.
Borzunov. M. G. “Spinning of cotton and chemical fibers” 2 - published by M. Legprombytizdat 1986
Own DST 604- 2016 “Cotton fiber Uzbek standard”.
