Authors

  • Abduvakhidov Mubashirkhon,
    Candidate of Technical Sciences., Prof., Namangan Engineering and Technological Institute, Uzbekistan, Namangan city
  • Muradov Akramjon Abdusatorovich,
    Candidate of Technical Sciences., Associate Professor, Namangan Engineering and Technological Institute, Uzbekistan, Namangan
  • Sayidmuradov Mirzokhid Mirzarahimovich
    Senior lecturer, Department of Process Machines and Equipment, Namangan Engineering and Technology Institute, Uzbekistan, Namangan city

DOI:

https://doi.org/10.37547/tajet/Volume02Issue07-09

Keywords:

: Pneumomechanical spinning (rotor spinning) yarn

Abstract

For the modern textile industry, one of the characteristic trends remains the desire to
increase the productivity of technological machines by increasing speed, which sets the task
of reducing the cost of electricity in pneumatic mechanical spinning, the successful solution
of which requires systematizing the accumulated information on new methods of shaping
yarn and structures of shaping and twisting devices to clarify a number of problems in the
development of the yarn forming method.

References

Pavlov Yu.V. Stationary finches in spinning.-М.: - Light Industry, 1973.

Spinnen von drehungsrreduzierten Rotorgarnen unter-Einsatz eines

Falschdrahtaggregats - Textil Praxis, 1975, 5. - c.532-533.

H. Aminirastabi et al., “Evaluation of nano grain growth of TiO2 fibers fabricated via

centrifugal jet spinning,” Nano-Structures and Nano-Objects, vol. 21, Feb. 2020, doi:

/j.nanoso.2019.100413.

X. Zhang et al., “Preparation and performance of novel polyvinylpyrrolidone/polyethylene

glycol phase change materials composite fibers by centrifugal spinning,” Chem. Phys. Lett