THERMAL COMFORT ENHANCEMENT IN ERGONOMIC CHAIR DESIGN USING PHASE CHANGE MATERIALS
Keywords:
Abstract
The aim of this article is to explore the utilization of phase change materials (PCMs) for enhancing thermal comfort in the design of ergonomic chairs. The thermal comfort of individuals seated for extended periods can be compromised due to excessive heat or cold. Traditional approaches, such as the use of air conditioning or heating systems, have limitations in terms of energy consumption and localized effects. In this study, the potential of PCMs is investigated as a passive and sustainable solution to regulate temperature and improve thermal comfort. The experimental methodology involves integrating PCMs into the chair structure and evaluating their impact on thermal sensation, skin temperature, and overall comfort. The findings indicate that the inclusion of PCMs in ergonomic chair design offers a promising strategy for achieving thermal comfort and reducing energy consumption.
Similar Articles
-
SUSTAINABILE PATHWAY BY MANAGING ROBOTS
The American Journal of Engineering and Technology: No. 04 (2022) / Rinaldo C. Michelini Di San Martino, -
Robotics And The Role Of Robots In Human Life
The American Journal of Engineering and Technology: No. 04 (2021) / Muxtasar Zayirjon Qizi Musayeva, -
DYNAMIC SIMULATION OF AN ACTIVE FRONT BUMPER SYSTEM FOR ENHANCED FRONTAL IMPACT PROTECTION
The American Journal of Engineering and Technology: No. 12 (2023) / Yusuf Mohammad Nasir, -
Primary Protection Of Structures
The American Journal of Engineering and Technology: No. 12 (2021) / Gulomiddinov Sarvarjon Gayradjonovich, Akhmedov Tolqin, Mirzaakhmedova Ugiloy Abdukhalimjohnovna, Хaydarov Abduхalil Mutalib Ogli, -
Important Principles Of Innovative Reforms In The Process Of Electronic Document Management In Railway Automation And Telemechanics
The American Journal of Engineering and Technology: No. 12 (2020) / Elmurod Astanaliev , -
Pressure Of Watermarked Social Database For Security And Improvement Of Capacity Utilization
The American Journal of Engineering and Technology: No. 07 (2020) / Mr. Pushpendra Kumar, Mr. Devendra Bisen,, -
Methodology Of Organization Of The Labor Process And Preservation Of Employees’ Health
The American Journal of Engineering and Technology: No. 04 (2021) / Shovkiddin Narziev , Javohir Asqarov , Azizbek Khokimyatov , -
DEVELOPMENT AND EXPERIMENTAL RESULTS OF A NEW CONSTRUCTION OF THE ELEMENT OF PROTECTION OF THE BASE OF THE JAVE PART OF QUARRY EXCAVATORS
The American Journal of Engineering and Technology: No. 04 (2022) / Galiya Yeleubaevna Raykhanova , Rustam Umarhanovich Djuraev, Sardorjon Abdumuminovich Turdiyev, -
Designed For Efficiency Plan: Exploratory Investigations Of Perform Multiple Tasks Vehicle
The American Journal of Engineering and Technology: No. 09 (2020) / Nili Oxman, Yoram Anglister, Uzi Motro, -
New Descendant’s Electronics The Development Trend Of Microprocessors Is From “Bigger” To “Small”
The American Journal of Engineering and Technology: No. 02 (2021) / Zohid Hakimov , Mukhtasar Musayeva,
References
Nevins, R. Temperature-Humidity Chart for Thermal Comfort of Seated Persons. ASHRAE Trans, 1966, 72, 283-291.
Streinu-Cercel, A.; Costoiu, S.; Mârza, M. Models for the indices of thermal comfort. Journal of Medicine and Life, 2008, 1(2), 148-156.
Matjaz, P. Thermodynamic analysis of human heat and mass transfer and their impact on thermal comfort. International Journal of Heat and Mass Transfer, 2005, 48, 731–739.
Du, X.; Li, B.; Liu, H.; Yang, D.; Yu, W.; Liao, J.; Xia, K. The response of human thermal sensation and its prediction to temperature step-change (cool-neutral-cool). PloS one, 2014, 9(8).
Fiala, D. Dynamic simulation of human heat transfer and thermal comfort (Ph.D. Thesis). De Montfort University, Leicester, 1998.
Erikson, H.; Krog, J.; Andersen, K. L.; Scholander, P. F. The critical temperature in naked man. Acta Physiologica Scandinavica, 1956, 37(1), 35–39.
Fiala, D.; Lomas, K. J.; Stohrer, M. Computer prediction of human thermoregulatory and temperature responses to a wide range of environmental conditions. International Journal of Biometeorology, 2001, 45(3), 143–159.
Gagge, A. P.; Stolwijk, J. A.; Hardy, J. D. Comfort, and thermal sensations and associated physiological responses at various ambient temperatures. Environmental Research, 1967, 1(1), 1–20.
Zalba, B.; Mar, J.M.; Cabeza, L.F.; Mehling, H. Review on thermal energy storage with phase change materials, heat transfer analysis and applications, Applied Thermal Engineering, 2003, 23, 251–283.
Xie, N.; Huang, Z.; Luo, Z.; Gao, X.; Fang, Y.; Zhang, Z. Inorganic salt hydrate for thermal energy storage.Applied Sciences, 2017, 7(12), 1317.
Liang, L.; Chen, X. Preparation and thermal properties of eutectic hydrate salt phase change thermal energy storage material. International Journal of Photoenergy, 2018.
Mondal, S. Phase change materials for smart textiles – An overview,Applied Thermal Engineering, 2008, 28, 1536–1550.
Shang LJ. Cooling comfort seat cushion, US Patent 6132455, 2000.
Chen, Y.; Wickramasinghe, V.; Zimcik, D. Development, and evaluation of hybrid seat cushions for helicopter aircrew vibration mitigation. Journal of Intelligent Material Systems and Structures, 2015, 26(13), 1633-1645.Based on Engine Vibration Signals." SAE Technical Paper 2015-01-1648, 2015.
