Authors

  • Bektemirov Abdujalol Do‘Smuxammad O‘G‘Li
    Phd Student Of Andijon Machine Building Institute, Uzbekistan
  • Turakhodjaev Nodir Djaxongirovich
    Dsc, Professor Of Tashkent State Technical University, Uzbekistan
  • Akhunjonov Anvarjon Sobirovich
    Senior Teacher Of Andijan Machine Building Institute, Uzbekistan
  • Erkinjonov Abdulhamid Baxtiyorjon O‘G‘Li
    Phd Student Of Andijan ,Achine Building Institute, Uzbekistan

DOI:

https://doi.org/10.37547/tajet/Volume05Issue12-04

Keywords:

Steel wheel carbon steel electric arc furnace

Abstract

This article provides information and descriptions of the new alloy fluidization technology for casting wheel parts without shock loads and the processes involved in casting the alloy into the mold.

References

Abdujalol, B., Nodir, T., Fakhriddin, M., Nuriddin, T., Kamola, T., & Nargiza, S. (2022). Development of steel wheel detail casting technology. Asian Journal of Multidimensional Research, 11(8), 82-88.

Pickering F. Overview of Titanium microalloyed steels. IoM Titanium Technology in

Microalloyed Steels. 1994: 10-43

Ergashev, D., & Khudayberdiev, O. (2023). Development of thermocyclic processing modes for carbon steels used on cold forming tools. In E3S Web of Conferences (Vol. 383, p. 04066). EDP Sciences.

Орибжон Рахимбердиевич Худайбердиев, Дилшодбек Мамасидиқович Эргашев, & Мавлюдахон Махамаджоновна Ходжимухамедова (2022). ҒОВАКЛИ ТЕМИР АСОСЛИ АНТИФРИКЦИОН ҚОТИШМАЛАРГА ЮКЛАМАНИНГ ТАЪСИРИ. Central Asian Academic Journal of Scientific Research, 2 (4), 127-134.

Bektemirov A.D.,Tashkhodjayeva K.U., Erkinjonov A.B. “Development of technology for obtaining high-quality cast products from carbon steel alloy” Scientific and technical journal of “Mashinasozlik” ISSN 2181-1539. № 2. 2022 y.