EGG-CITING ADVANCES: CULINARY CHEMISTRY IN FABRICATING COMPOSITE COPPER/FLY ASH FOAM WITH ENHANCED MATERIAL PROPERTIES
Keywords:
Abstract
This study explores innovative advancements in material science by incorporating culinary chemistry techniques in the fabrication of composite copper/fly ash foam. Utilizing egg yolk as a foaming agent, the resulting material exhibits enhanced mechanical strength, thermal conductivity, and a unique foam structure. The interdisciplinary approach merges the strengths of copper and fly ash with the emulsifying properties of egg yolk, introducing a novel dimension to material synthesis. The study's findings offer promising insights into the potential applications of this egg-citing composite foam in fields requiring lightweight, insulating, and structurally sound materials.
Similar Articles
-
A COMPARATIVE ANALYSIS OF MODERN AND TRADITIONAL METHODS OF TEACHING ENGINEERING GRAPHICS
The American Journal of Engineering and Technology: No. 11 (2023) / Mashrapova Gulbakhor Mamasalievna, -
About The Special Regime Of Use And Standards Of Land Plots And Their Buffer Zones Located In Borders Of Roadside Strips Of Highways Of The Ferghana Region Of The Republic Of Uzbekistan
The American Journal of Engineering and Technology: No. 09 (2020) / Abdullayev Ibrohim Numanovich, Marupov Azizxon Abbosxonovich, -
The Use Of Fractal Theory In Digital Signal Processing In Radio Communication Systems
The American Journal of Engineering and Technology: No. 09 (2020) / Davronbekov Dilmurod Abdujalilovich, Tuychiev Bekzod Oromovich, -
EFFICIENT ELECTRONIC EQUIPMENT LOAD MONITORING IN FERRY SHIP PASSENGER ROOMS WITH LORA WIRELESS TELEMETRY
The American Journal of Engineering and Technology: No. 10 (2023) / Hendra Andri Widodo, -
IMPROVING THE METHODS OF USING GRAPHIC PROGRAMS WHEN TEACHING DRAWING IN ENGINEERING GRAPHICS
The American Journal of Engineering and Technology: No. 09 (2023) / Umrzok Qabiljonovich Rustamov, -
Ways Of Implementing Wiki Technology In Teaching English
The American Journal of Engineering and Technology: No. 04 (2021) / Safarova Fotima Isamiddinovna, -
The Use Of Artificial Intelligence Is Currently Relevant And The Reasons For This
The American Journal of Engineering and Technology: No. 05 (2021) / Izzatbek Po’latov Xislat O’g’li, Mashxurbek Muhiddinov Ikromjon O'g'li, Ibragimov Anvar Abdurahim O'g'li, -
VOLTAGE DYNAMICS IN A DECENTRALIZED POWER LANDSCAPE: ANALYZING THE IMPACT OF DISTRIBUTED GENERATION ON DISTRIBUTION NETWORK PROFILE
The American Journal of Engineering and Technology: No. 07 (2023) / Roland Idowu , -
Synthesis Of An Electric Drive Control System With A Fuzzy Controller
The American Journal of Engineering and Technology: No. 03 (2021) / Mamatyusuf Mamatkarimovich Nuryodiev, Rakhmonjon Uzakov, -
SOREL CEMENT A VERSATILE MATERIAL FOR CONSTRUCTION AND BEYOND
The American Journal of Engineering and Technology: No. 12 (2023) / Qambarova Manzurahon Maripjanovna,
References
B. Ertu, Sintering Applications. Croatia: Intech, 2013.
B. F. Topin, J. Bonnet, B. Madani, and L. Tadrist, “Experimental Analysis of Multiphase Flow in Metallic foam : Flow Laws , Heat Transfer and Convective Boiling **,” no. 9, pp. 890–899, 2006.
D. E. Tyler and W. T. Black, ASM Handbook Volume 2 Properties and Selection: Nonferrous Alloys and Special-Purpose Materials. ASM International, 1990.
K. J. A. Kundig, Copper and Copper Alloys. New Jersey: Randolph, 2002.
J. Banhart, Manufacture , characterisation and application of cellular metals and metal foams, vol. 46. Bremen: Frauhofer-Institure for Manufactureing and Advanced Materials, 2001.
M. F. Ashby, A. G. Evans, N. A. Fleck, L. J. Gibson, J. W. Hutchinson, and H. N. G. Wadley, Metal Foams : A Design Guide. United States of America: Butterworth-Heinemann, 2007.
J. Baumeister, J. Banhart, and M. Weber, “Aluminium foams for transport industry,” vol. 18, pp. 217–220, 1998.
L. T. Nji, “Fly Ash : Overview -Lauw Tjun Nji,” 2015. .
Fadli and I. Sopyan, “Porous ceramics with controllable properties prepared by protein foaming-consolidation method,” pp. 195–203, 2011.
J. Wang, H. Kong, Y. Xu, and J. Wu, “Experimental investigation of heat transfer and flow characteristics in finned copper foam heat sinks subjected to jet impingement cooling,” Applied Energy, vol. 241, no. November 2018, pp. 433–443, 2019.
Z. Rao, Y. Wen, and C. Liu, “Enhancement of heat transfer of microcapsulated particles using copper particles and copper foam,” Particuology, 2018.
T.-Rehman, H. Muhammad, A. Saieed, W. Pao, and M. Ali, “International Journal of Heat and Mass Transfer Copper foam / PCMs based heat sinks : An experimental study forelectronic cooling systems,” International Journal of Heat and Mass Transfer, vol. 127, pp. 381–393, 2018.
Sopyan, A. Fadli, and M. Mel, “Porous alumina –hydroxyapatite composites through protein foaming –consolidation method,” Journal of the Mechanical Behavior of Biomedical Materials, vol. 8, pp. 86–98, 2012.
