STUDYING THE RELIABILITY OF AN INTERNAL COMBUSTION ENGINE BASED ON AN ANALYSIS OF ENGINE OIL
Keywords:
Abstract
Specifically, greenhouse gases (CH4, N2O, CO2, CO, SO2), are strong climate forcers, and articulate pollution all have detrimental health effects. Vehicle on-road traffic is a major contributor to air pollutants in urban areas that affect human population health, the environment at local and regional scales, and the global climate.[1] This study forces a numerical study of engine oil by engine conditions by using different type of fuels. Engine oil main parameters and internal combustion engines were investigated under real-world conditions for driving cycles typical for Tashkent urban environments. Three kinds of laboratory equipment and ISO standards were utilized. Our study shows that by using different types of fuel, the life cycle point of motor oil varies. Total base number (TBN), Total acid number (TAN), viscosity and flash points were taken as basic parameters of engine oil. The viscosity value of oil dominated the other characteristics. In general, in our study to improve engine performance, we must consider engine oil, which is one of the key parameters.
Similar Articles
-
THE EFFECT OF STATIC MIXER ON AEROBIC BIOGRANULES FORMATION FOR TEXTILE INDUSTRY WASTEWATER TREATMENT
The American Journal of Engineering and Technology: No. 08 (2023) / A. R. Abdul Sulaiman, -
ENHANCING PALM OIL MILL EFFLUENT TREATMENT: HARNESSING BIOENGINEERED STRUCTURAL BIOMEDIA
The American Journal of Engineering and Technology: No. 12 (2023) / Syed B. Bustary, -
Change Of Physiological And Biochemical Properties Of Plant Raw Materials During Thermal Preparation Before Extraction
The American Journal of Engineering and Technology: No. 11 (2020) / Gafurov K.Kh., -
Innovative Technologies For Manufacturing Foam Models And Cast Steel Parts Of Harrow Tooth With Wear-Resistant Carbide Coating By Casting On Gasifyable Models And Their Optimal Thermal Treatment
The American Journal of Engineering and Technology: No. 12 (2021) / Tilabov Baxodir Qurbanovich, -
Development Of Technology To Increase Resistance Of High Chromium Cast Iron
The American Journal of Engineering and Technology: No. 03 (2021) / Turakhodjaev Nodir, Saidmakhamadov Nosir, Turakhujaeva Shirinkhon, Khaltursunov Erkin, Turakhujaeva Azizakhon, Akramov Mukhammadali, -
INVESTIGATION OF STRENGTH PROPERTIES OF RADIATION-MODIFIED POLYMER COATINGS
The American Journal of Engineering and Technology: No. 12 (2023) / Tojiboyev Begijon Mamitjonovich, Yakubjonov Fayzulloh Tursunali O‘G‘Li, Xojimatov Umidbek Turgʻunboy Oʻgʻli, -
Restoration Erosion Working Surface Of Gin Rib By Welding Process
The American Journal of Engineering and Technology: No. 06 (2021) / Xoshimov Xalimjon Xamidjanovich, Igamberdiyev Madaminjon Qo`Chqarboyevich, Abdullayev Shavkat Azimovich, Xoliqov Farrux Baxtiyor O`G`Li, -
Investigation Of Methods To Increase The Fire Resistance Of Reinforced Concrete Structures By Treatment With Thin-Layer Fire-Resistant Inflatable Coatings
The American Journal of Engineering and Technology: No. 06 (2021) / A.B. Axmedov , Sh.E. Kurbanbaev , B.T. Ibragimov , -
OPTIMIZATION OF THE PARAMETERS OF THE SOIL MOVING KNIFE PLATES FOR TREATMENT OF SLOPES OF RIDGES
The American Journal of Engineering and Technology: No. 06 (2023) / A.A. Ibragimov, A.A. Abdurakhmanov, P.F.Orinbayev, -
Production Of Heavy Oil Products From Oil Sludge At Atmospheric Pressure
The American Journal of Engineering and Technology: No. 09 (2021) / Nodir Sharifovich Yakhyaev , Abror Akbarovich Aliev ,
References
T.Rönkkö, L.Pirjola, P.Karjalainen, P.Simonen, K.Teinilä, M.Bloss, L. Salo, Arindam Datta, B.Lal, R.K.Hooda, S.Saarikoski, H.Timonen, “Exhaust particle number and composition for diesel and gasoline passenger cars under transient driving conditions: Real-world emissions down to 1.5 nm” Environmental Pollution,Volume 338, 2023, 122645, ISSN 0269-7491.
Luigi De Simio, Sabato Iannaccone, Chiara Guido, Pierpaolo Napolitano, Armando Maiello, Natural Gas/Hydrogen blends for heavy-duty spark ignition engines: Performance and emissions analysis, International Journal of Hydrogen Energy, Volume 50, Part B, 2024, Pages 743-757, ISSN 0360-3199.
Balaji Ramachandran, Ravikumar Solomon, Pardeep Sangwan, C. Edwin Samuel, Unai Fernandez-Gamiz, Shyam Sundar Santra, Mohamed Altanji, Vediyappan Govindan, An experimental analysis on performance of tobacco seed oil as an alternative fuel for diesel engine, Alexandria Engineering Journal, Volume 80, 2023, Pages 408-416, ISSN 1110-0168.
- Smith, J., & Johnson, A. (2018). "Best Practices for Engine Oil Sampling and Analysis." Journal of Mechanical Engineering, 10(2), 87-102.
- Brown, C., & White, D. (2017). "Advanced Analytical Techniques for Motor Oil Characterization." Proceedings of the International Conference on Engine Technology, 223-235.
- Green, S., & Anderson, B. (2019). "Wear Metal Analysis in Engine Oil: Implications for Engine Maintenance." Tribology International, 45(3), 301-315.
- Davis, K., et al. (2020). "Viscosity Analysis in Motor Oil: Correlation with Engine Performance." Journal of Automotive Engineering, 12(4), 511-525.
- Lee, M., & Williams, E. (2018). "Quality Control Protocols in Oil Analysis Laboratories." International Journal of Analytical Chemistry, 7(1), 132-147.
- Garcia, R., et al. (2019). "Calibration Practices for Analytical Instruments in Oil Analysis." Chemical Engineering Journal, 22(3), 411-426.
