IMPROVING OF THE EFFICIENCY OF CLEANING OF THE BOTTOM OF THE BOREHOLE FROM THE CRUSHED SLURRY ON THE BASIS OF IMPROVING OF THE CONSTRUCTION OF A THREE-BALLCHISEL
-
EXPERIMENTAL RESULTS ON THE EFFECTIVENESS OF AN IMPROVED EXCAVATOR BUCKET TOOTH DESIGN
The American Journal of Engineering and Technology: No. 03 (2022) / Sardorjon Abdumuminovich Turdiyev, Rustam Umarhanovich Djuraev ,
-
DEVELOPMENT AND EXPERIMENTAL RESULTS OF A NEW CONSTRUCTION OF THE ELEMENT OF PROTECTION OF THE BASE OF THE JAVE PART OF QUARRY EXCAVATORS
The American Journal of Engineering and Technology: No. 04 (2022) / Galiya Yeleubaevna Raykhanova , Rustam Umarhanovich Djuraev, Sardorjon Abdumuminovich Turdiyev,
-
DEVELOPMENT OF A NEW DESIGN OF CUTTING ELEMENTS FOR QUARRY EXCAVATOR BUCKETS AND RESULTS OF ITS EXPERIMENTAL RESEARCH
The American Journal of Engineering and Technology: No. 04 (2022) / Galiya Yeleubaevna Raykhanova , Rustam Umarhanovich Djuraev, Sardorjon Abdumuminovich Turdiyev,
Keywords:
Abstract
In terms of the problems of effective use of reserves in the technological processes of drilling, it is important to wash the drilling scaffold, that is, to effectively clean it from the crushed slurry. Cleaning the drilled borehole bottom combines three processes that differ from each other: cleaning the bottom surface from the crushed slurry, cleaning the bottom wall environment and cleaning the ore-cleavage device from the adhesion of the slime is important. In this article, the construction of the ore-shredding device has been improved in order to effectively clean the drilled scaffold from the cuttings and eliminate the negative consequences of the slurry regime. The results of the experiment-test showed that the mechanical speed of the drilling of the scaffold and the increase in the performance resource of the drilling Hopper were achieved.
Similar Articles
-
Experimental-Industrial Testsand Industrial Implementation Of The Developed Design Of The Locking Hole Of Explosive Charges When Passing Underground Mining Works
The American Journal of Engineering and Technology: No. 10 (2021) / Otabek Muxitdinovich Giyazov,
References
Solovev N.V., Chixotkin V.F., Bogdanov R.K., Zakora A.P. Resursosberegayuщaya texnologiya almaznogo bureniya v slojnыx geologicheskix usloviyax. – Moskva, VNIIOENG, 1997. – 332 s.
Merkulov M.V., Djuraev R.U., Leontyeva O.B., Makarova G.Y., Tarasova Y.B. Simulition of thermal power on bottomhole on the bases of experimental studies of drilling tool operation // International Journal of Emerging Trends in Engineering Research. –Volume 8. – No.8, August 2020. – pp. 4383-4389.
Djuraev R.U., Merkulov M. V., Kosyanov V. A., Limitovskiy A. M. Povыshenie effektivnosti porodorazrushayuщego instrumenta pri burenii skvajin s produvkoy vozduxom na osnove ispolzovaniya vixrevoy trubы. // Gornыy jurnal. – Izd. «Ruda i metallы». – Moskva, 2020. – №12. – S. 71-74.
Djuraev R.U., Mustafayev O.B. Improving the Efficiency of Rock Destruction Tools when Drilling Wells in difficult Mining and Geological Conditions // International Journal of Emerging Trends in Engineering Research. –Volume 9. – No.3, March 2021. – pp. 198-202.
