Analysis Of Drilling Speed Of Cine Drill Bits
Keywords:
Abstract
The article discuss methods of the calculating speed of drilling with cone bits and compare with the real drilling speed on the mine. The methods of determining the drilling speed of different researchers are considered. The method of calculating the speed with the most approximate indicators from the practical drilling indicators is studied. A table of comparisons of drilling speed indicators determined by formulas and by reference is compiled.
Similar Articles
-
Development Of A Device For Softening The Circulating Water Of The Cooling System Of Stationary Mine Compressor Units
The American Journal of Engineering and Technology: No. 08 (2021) / Khatamova Dilshoda Narmuratovna, -
Improving The Economic And Environmental Performance Of Engines Through The Use Of Alternative Fuels
The American Journal of Engineering and Technology: No. 04 (2021) / Ismatov J.F., Jalilov J.Kh., Bekmurodov S.G., Khujamov A., Fayzullaev A.J., -
ASSURANCE SUPPORT DEVICE FOR COLOMBO RESERVOIR CONDUIT PLAN WATER VIEWPOINT RECOGNITION
The American Journal of Engineering and Technology: No. 06 (2022) / Y.A. Perera, R.M. Surenth, -
UNLOCKING SUSTAINABILITY: MICRONISED BIOMASS SILICA AS A NOVEL CEMENT REPLACEMENT IN CONCRETE
-
SOLAR DESALINATION AT HOME: MEETING HOUSEHOLD WATER NEEDS WITH SUN-POWERED SOLUTIONS
The American Journal of Engineering and Technology: No. 04 (2024) / Shahadat Hossain, -
Significance And Harmful Effects Of Some Heavy Metals Present In Food For The Metabolic Process
The American Journal of Engineering and Technology: No. 09 (2020) / Sevara Tojimatovna Yulchiyeva, Shaxnoza Davlatovna Hudoyberdiyeva, -
FUZZY LOGIC-BASED AIR CONDITIONER CONTROL SYSTEM: DESIGN AND DEVELOPMENT
-
ENHANCING PALM OIL MILL EFFLUENT TREATMENT: HARNESSING BIOENGINEERED STRUCTURAL BIOMEDIA
The American Journal of Engineering and Technology: No. 12 (2023) / Syed B. Bustary, -
Reduction Of Soil Compression Making Friable Tractor Trace At Pre-Sowing Soil Preparation
The American Journal of Engineering and Technology: No. 02 (2021) / Kaypov Mаhamatdin Urazbaevich , Utepbergenov Bazarbay Kenesbaevich , Ramazanov Bakhitbay Nietbayevich , -
EFFICIENT ELECTRONIC EQUIPMENT LOAD MONITORING IN FERRY SHIP PASSENGER ROOMS WITH LORA WIRELESS TELEMETRY
The American Journal of Engineering and Technology: No. 10 (2023) / Hendra Andri Widodo,
References
Shingin A.V., Gilev A.V., Design of an idealized model of rock drilling with various physical and mechanical properties// Fundamental research, Vol. 3, 2012. pp. 665-667.
Shingin A.V., Shingin A.A., Operating parameters and characteristics of cone drill bits// Modern problems of science and education, Vol. 5, 2014.
Kiryukov G.M. Physics of rock destruction during drilling and blasting. Vol 2. Moscow: MGSU, 2007. 16-18 p.
Tsuprikov A.A., Cherednichenko V.G., Kritskaya L.M., Analysis of the process of rock destruction by a chisel when drilling wells // Scientific journal of KubGAU. 2011. No. 74. pp. 37-46.
Toshov J.B., Toshniyozov L.G., Baratov B.N., Ochilov S.T. Technology for the development of efficient drilling tools // Mining Bulletin of Uzbekistan. - Navoi, 2018. – №1. – 71-73 pp.
Poderni R.Yu. Mechanical equipment of opencast pits. Moscow: Moscow State University, 2007.
Eigeles R.M. Strelkov R.V. Calculation and optimization of well drilling processes. Moscow: Nedra, 1977.
Tyupin V.N. Establishing the speed of spherical and impact-rotational drilling of wells using the law of conservation of energy // Mining Information and Analytical Bulletin, Vol. 6, 2020. pp. 77-84.
Kutuzov B. N., Tyupin V. N. Simplified calculation of parameters of a mass explosion at a quarry // Izvestiya vuzov. Mining Journal. 1985. No. 7. pp. 66-67.
Bai P. Experimental Research on Rock Drillability in the Center of Junggar Basin // The Electronic Journal of Geotechnical Engineering, Vol. 18, No. 2013. pp. 5065-5074.
Merkulov M.V., Djuraev R.U., Leontyeva O.B., Makarova G.Y., Tarasova Y.B. Simulition of thermal power on bottomhole on the bases of experimental studies of drilling tool operation // International Journal of Emerging Trends in Engineering Research. – 2020. Vol. 8, №.8. – Р. 4383-4389.
Djuraev R.U., Merkulov M.V., Kosyanov V.A., Limitovsky A.M. Increasing the effectiveness of rock destruction tools when drilling wells with blowing air based on the use of a vortex tube. // Mining Journal. - Izd. "Ore and Metals". - Moscow, 2020. – №12. pp. 71-73. DOI: 10.17580/gzh.2020.12.16.
