Production Of Heavy Oil Products From Oil Sludge At Atmospheric Pressure
Keywords:
Abstract
Technology for producing petroleum products based on oil sludge, the method of heat treatment of oil-containing waste at atmospheric pressure was used. The resulting cubic residues of oil sludge processing were tested for compliance with GOST 22245-90 and GOST 9812-74. The dependence of the qualitative indicators of cubic residues on the oxidation time is presented. Depending on the oxidation time, the physical and mechanical characteristics of bitumen can significantly change.
Similar Articles
-
The Role Of The Technical Regulatory System In Ensuring Product Quality And Safety In Enterprises Producing Construction Materials
The American Journal of Engineering and Technology: No. 12 (2020) / Muminov Najmiddin Shamsiddinovich , Alimbaev Sobit Axmatovich , Kuvandikov Adkhamjon Latifjonovich, -
Models And Methods Of Data Processing Remote Sensing
The American Journal of Engineering and Technology: No. 02 (2021) / Valery Mikhailovich Grishkin, Sardor Ilhom Ugli Karimov , -
Complex Atlases And Their Classifications
The American Journal of Engineering and Technology: No. 03 (2021) / Khakimova Kamolat Raximjonovna, Parpiyeva Gulmirakhon Mamajonovna, -
Problems Of Development Of International Mountain Tourism In Uzbekistan
The American Journal of Engineering and Technology: No. 03 (2021) / Saodat Lapasovna Alibekova, Dilshod Farkhadovich Nasirov, -
About One Algorithm For Generating Reference Data In Pattern Recognition
The American Journal of Engineering and Technology: No. 04 (2021) / Gulomjon Primovich Juraev, -
Theoretical Principles Of Designing Modern Clothing Based On A Creative Source
The American Journal of Engineering and Technology: No. 7 (2021) / Djuraeva Shakhnozakhon Gayratovna, -
Studies On The Resistance And Fire Resistance Of Reinforced Concrete
The American Journal of Engineering and Technology: No. 01 (2021) / Khikmatilla Khasan Ugli Abdullayev , -
Pseudo Polynomial Reduction Of Problems And Strong Np-Hard Problems
The American Journal of Engineering and Technology: No. 02 (2021) / Tatyana Matveevna Kosovskaya, Elmurod Solijon Ugli Kodirov, -
Application Of Logistical Principles In The Development Of Directions In The Region
The American Journal of Engineering and Technology: No. 05 (2021) / Abdimurot Urokovich Kuziev, Abobakr Kholikberdievich Muratov, -
DYNAMIC SIMULATION OF AN ACTIVE FRONT BUMPER SYSTEM FOR ENHANCED FRONTAL IMPACT PROTECTION
The American Journal of Engineering and Technology: No. 12 (2023) / Yusuf Mohammad Nasir,
References
GOST 22245-90 Road oil bitumen, viscous. - Moscow: Publishing House of standards. - 1991. - 9 p.
GOST 11506-73 Petroleum bitumen. A method for determining the softening temperature by a ring and a ball. - M.: Publishing house of standards. - 1973. - 7 p.
GOST 9812-74 Oil insulating bitumen. Technical conditions-M.: Publishing house of standards. - 1975. - 8 p.
GOST 6617-76 Oil construction bitumen. Technical conditions-Moscow: Publishing house of standards. - 1977. - 8 p.
GOST 9548-74 Oil roofing bitumen. Technical conditions-Moscow: Publishing house of standards. - 1977. - 8 p.
Gridina M. S. a Study of the influence of components of oil-containing waste on the quality of the products Hydrotreating hydrocarbon fractions: author. dis. Cand. chem. science: 02.00.13 - Samara, 2014.
Konovalov A. A. development of technology for the production of durable road bitumen: author. dis. kand. tekhn. science: 05.17.07 - Moscow, - 2005.
Gong, R. B. Petroleum bitumen. / M.: Chemistry, - 1973. - 432 p.
Rudenskaya I. M. Oil bitumen. / M.: Higher School. MADI. - 1964. - 40 p.
Grudnikov I. B. Production of petroleum bitumen. M.: Chemistry. - 1983.-192 p.
