Development Of A Device For Softening The Circulating Water Of The Cooling System Of Stationary Mine Compressor Units
Keywords:
Abstract
The operation of mine compressors in the mining industry is one of the energy-consuming processes that require resource saving. In the balance of mining enterprises, the specific weight of compressor equipment that produces compressed air as pneumatic energy is 20-35% and its further improvement affects the indicators of subsequent technological processes. The widespread use of compressed air requires the need to reduce operating costs by developing effective technical solutions in the process of producing compressed air at industrial enterprises and increasing the energy efficiency of operating compressor units.
To date, a number of significant shortcomings of the cooling system caused by the peculiarities of the principle of their operation have been identified throughout the world during the operation of mine compressor units. Thus, the undercooling of air in reciprocating compressors for every 5-6℃ increases the energy consumption for air compression by 1%, and the productivity decreases by 8-10%, which leads to significant economic losses in the production of compressed air.
In this regard, there is a need to study the influence of the quality of compressed air cooling on the efficiency of the compressor unit, to develop scientific foundations for improving the efficiency of mine compressor units by improving their cooling system, to develop a device for softening make-up water.
Similar Articles
-
CFD Reenactment of a Solitary Stage Fluid Stream across a Bluff Body
The American Journal of Engineering and Technology: No. 05 (2021) / Emem Archibong Enyia, -
Creating A New Range Of Boots For Young Children
The American Journal of Engineering and Technology: No. 06 (2021) / Nizom Adashaliyevich Ismatullayev , Abrorjon Olimjon Ugli Homidjonov , Muhayyo Ibrohimjon Qizi Tohirova, -
CREATING INCLUSIVE SPORTS PLAYGROUNDS: STRATEGIES FOR CHILDREN WITH DEVELOPMENTAL DELAYS
The American Journal of Engineering and Technology: No. 12 (2023) / Davlatova Odina Zokirjonovna, Tursunov Axrorbek Aminjon o‘g‘li, Maxkamova Muyassar Musajanovna, -
THE ABILITY TO UNDERSTAND ANYONE ON A PROFOUND LEVEL AND WORD RELATED PRESSURE OF RUSTIC AND METROPOLITAN POLICE
The American Journal of Engineering and Technology: No. 11 (2022) / Pro. Saima Anjum, -
Determination Of Parameters Of The Separating Pipe Pneumatic Conveying System Cotton Pickers
The American Journal of Engineering and Technology: No. 03 (2021) / Sattar Ramazanovich Alikulov, -
EFFICIENT ELECTRONIC EQUIPMENT LOAD MONITORING IN FERRY SHIP PASSENGER ROOMS WITH LORA WIRELESS TELEMETRY
The American Journal of Engineering and Technology: No. 10 (2023) / Hendra Andri Widodo, -
Application Of Effective Technology To Increase Of Base Stability Of Low Pressure Hydrotechnical Constructions On Soft Grounds
The American Journal of Engineering and Technology: No. 06 (2021) / Dilmurat Abduganievch Mamatkulov, Farid Samadovich Saidov , Daniyar Tanirbergenovich Paluanov, -
DIELECTRIC PROPERTIES OF MICRO-COMPOSITES BASED ON ACRYLIC COATED CONDUCTING CARBON PARTICLES AND SILICONE ELASTOMER
The American Journal of Engineering and Technology: No. 07 (2023) / Vishal Mishra, -
Influence Of Gasoline Evaporation Temperature For Engine Running
The American Journal of Engineering and Technology: No. 12 (2021) / Dr. Zebo X. Alimova, Ilkhom Sh. Usmonov, Fahriddin I. Sidikov, Dr. Anvar G. Kodirov, -
SUBSTANTIATION OF AN EFFICIENT VARIANT OF THE MAIN CONVEYOR IN THE CONDITIONS OF DAUGIZTAU QUARRY
The American Journal of Engineering and Technology: No. 05 (2022) / Gaffarov Azamat Alisherovich , Haydarov Shohidjon Bahridinovich ,
References
Minyaev Y.N. Energy saving in the production and distribution of compressed air at mining enterprises. // – Ekaterinburg: USMU Publishing House, - 2010. – 138 p.
Djuraev R.U., Merkulov M.V., Kosyanov V.A., Limitovsky A.M. Increasing the effectiveness of rock destruction tools when drilling wells with blowing air based on the use of a vortex tube. // Mining Journal. - Izd. "Ore and Metals". - Moscow, 2020. – №12. pp. 71-73. DOI: 10.17580/gzh.2020.12.16
Plastinin P. I. Piston compressors. Т. 1. Theory and calculation. Moscow: Kolos, 2000. 456 p.
Merkulov M.V., Djuraev R.U., Leontyeva O.B., Makarova G.Y., Tarasova Y.B. Simulation of thermal power on bottomhole on the bases of experimental studies of drilling tool operation // International Journal of Emerging Trends in Engineering Research. Volume 8, No.8, 2020. - pp. 4383-4389.
Djuraev R.U., Shomurodov B.H., Hatamova D.N., Tagirova Y.F. Modernization of cooling system of piston compressor units // Proceedings of IX International Scientific and Technical Conference on: "Achievements, problems and modern trends of development of mining and metallurgical complex". - Navoi, 2017. – pp. 176.
Djuraev R.U., Khatamova D.N., Shomurodov B.H. Utilization of secondary energy resources of compressor station using heat pump // Proceedings of IX International Scientific and Technical Conference on the theme: "Achievements, problems and modern tendencies of development of mining-metallurgical complex". - Navoi, 2017.– pp. 537.
