Justification Of The Angle Of Installation Of The Upper Edge Of The Dump To The Direction Of Movement And The Law Of Variation Of The Angles Of The Horizontal Generatrices Of The Dump To The Direction Of Movement
Keywords:
Abstract
The wing mounting angles are the angles of its installation to the bottom of the furrow ε_КР and to the direction of motion in the plane touching the ploughshare-moldboard surface in the area of the upper edge of the wing. To reduce the traction resistance of the canal digger, when choosing the installation angles of the wing, one should proceed from the condition of reducing the angle of capture of the seam by the moldboard . It is known from the theory of the share-moldboard surface that the angle has a very significant effect on the traction resistance of the tool.
Similar Articles
-
Functional And Economic Features Of The Organization Of The System Of Public Buildings In Rural Architecture
The American Journal of Engineering and Technology: No. 04 (2021) / Dildora Fayziddinovna Ubaydullaeva, -
History And Current State Of Public Catering Establishments In The Fergana Valley
The American Journal of Engineering and Technology: No. 06 (2021) / Qosimov Saidjon, Urmonov Bakhrom, Rahmonov Dilmurod, -
Style "Gotika And Roman" In Architecture. Quality Changes In European Architecture In X-XII Centuries
The American Journal of Engineering and Technology: No. 12 (2021) / Akhmedov Tolqin, Mirzaakhmedova Ugiloy Abdukhalimjohnovna, Хaydarov Abduхalil Mutalib Ogli, Gulomiddinov Sarvarjon Gayradjonovich, -
Reception Of Improving The Microclimate In The Houses Of The Fergana Valley
The American Journal of Engineering and Technology: No. 06 (2021) / Nabiev Momin, Qodirov Giyosjon Mirzajonovich, Sadirov Bahrom Tursunalievich , Gulomiddinov Sarvarjon Gayradjonovich , -
Determination Of Condensation On The Inner Surface Of The Walls Of Canoe Buildings Under The Influence Of Aerosols
The American Journal of Engineering and Technology: No. 12 (2021) / Qodirov Giyosjon Mirzajonovich, Mirzaeva Zarnigor Alisher Qizi, -
Engineering Training Of Territories In Planning And Reconstruction Of Large Cities
The American Journal of Engineering and Technology: No. 12 (2021) / Хaydarov Abduхalil Mutalib Ogli, Akhmedov Tolqin, Mirzaakhmedova Ugiloy Abdukhalimjohnovna, Gulomiddinov Sarvarjon Gayradjonovich, -
Corrosion State Of Reinforced Concrete Structures
The American Journal of Engineering and Technology: No. 06 (2021) / Gulomiddinov Sarvarjon Gayradjonovich , Qodirov Giyosjon Mirzajonovich, Sadirov Bahrom Tursunalievich , Хaydarov Abduхalil Mutalib Ogli, -
Primary Protection Of Structures
The American Journal of Engineering and Technology: No. 12 (2021) / Gulomiddinov Sarvarjon Gayradjonovich, Akhmedov Tolqin, Mirzaakhmedova Ugiloy Abdukhalimjohnovna, Хaydarov Abduхalil Mutalib Ogli, -
Prospects For The Use Of Polymer Composite Fittings In Building Structures In The Republic Of Uzbekistan
The American Journal of Engineering and Technology: No. 06 (2021) / Ashurov Muftoxiddin, Sadirov Bahrom Tursunalievich , Хaydarov Abduхalil Mutalib Ogli, Ganiyev Akbar Asiljon Ogli, Sodikhonov Sardorhon Sobirkhon Ogli, Khaydarova Kholishon Qodirali Qizi , -
Strengthening Of Deficient Concrete Structures Under Loads And High Temperatures
The American Journal of Engineering and Technology: No. 12 (2021) / Mirzaakhmedova Ugiloy Abdukhalimjohnovna, Akhmedov Tolqin, Хaydarov Abduхalil Mutalib Ogli, Gulomiddinov Sarvarjon Gayradjonovich,
References
Bakhramov F.Kh, Kurbanov A.T and other. Theoretical prerequisites for determining the rational parameters of temporary irrigators. Journal of Critical Reviews. ISSN 2394-5125. Vol 7, ISSUE 13.2020. [in English]
Bakhramov F.Kh., Karshiev F. U., Sheraliev M. Theoretical Substantiation of the Basic Parameters of a Channel Digger. ISSN:2350-0328. International Journal of Advanced Research in Science, Engineeerring and Technology. Vol. 7, Issue 6, June 2020. [in English]
Gallyamov R.M. Influence of displacement of the plow body PYa-3-35 on the quality of plowing // Mechanization and electrification of socialist agriculture. 1978. No. 2.-С.11-13. [in Russian]
Imandosov A.T. Substantiation of the parameters and layout of the body of a two-tier plow for work at high speeds in the cotton growing area. Diss. Candidate of Engineering Sciences, Yangiyul. 1991.-p. 130. [in Russian]
Listopad GE, Sharshak VK, Solodoboev VV Reclamation machines, tools for the temporary irrigation network. Moscow: Agropromizdat, 1986.-126 p. [in Russian]
Manabaev N., Bakhramov F. The choice of the transverse profile of a temporary sprinkler.- book: Mechanization of labor-intensive production processes in the cotton growing zone. Materials of the scientific and practical conference. UzNIIME, UzASKhN. Tashkent, 1992.-P.15-16. [in Russian]
Bakhramov F. Kh. Substantiation of the parameters of the working body of the canal digger for cutting temporary sprinklers. Abstract dissertation. Candidate of Engineering Sciences. Yangiyul. 1995.-115 p. [in Russian]
Khasanov S.M. Substantiation of the optimal parameters of canal diggers. Questions of agricultural mechanics. T-X IU.-Minsk. Harvest. 1964.- S. 5-28. [in Russian]
Osadchy A.P. Research of soil crumbling processes without seam turnover. Abstract of the dissertation for the degree of Doctor of Science. Tech. Science. - Bolgograd. 1972.-39 p. [in Russian]
Dospekhov B.A. Field experiment technique. -Moscow. Kolos. 1979.-416 s.
GOST 20915-75. Agricultural machinery. Methods for determining test conditions.-Moscow. From standards. 1975.-34 p. [in Russian]
Bakhramov F.Kh. Substantiate the shape of the working body of the canal opener. Collection of materials of the Republican scientific-technical conference "Perspectives of development of transport and road complex in the southern republics". Termiz. Surxon-Nashr. 2017. -s 28-29. [in Uzbek]
