Authors

  • Turakhodjaev Nodir
    Professor, Head Of Foundry Technologies Department, Tashkent State Technical University, Uzbekistan
  • Tashkhodjaeva Kamola
    PhD Student, Department Of Foundry Technologies, Tashkent State Technical University, Uzbekistan
  • Abdullaev Kamol
    Associate Professor, Department Of Machinery Technology Namangan Engineering Construction Institute, Uzbekistan
  • Begmatov Dilmurod
    Senior Teacher, Department Of Machinery Technology Namangan Engineering Construction Institute, Uzbekistan

DOI:

https://doi.org/10.37547/tajet/Volume03Issue04-03

Keywords:

Aluminum chemical element constitute

Abstract

This paper examines the effect of hydrogen gas on the quality of the casting during the liquefaction of aluminum alloy. In addition, the technology for the separation of aluminum from Al2O3 oxide, depending on the liquefaction temperature during the liquefaction of aluminum alloy.

References

Turakhodjaev N. D. et al. ANALYSIS OF DEFECTS IN WHITE CAST IRON //Theoretical & Applied Science. – 2020. – №. 6. – С. 675-682.

Turakhodjaev N. et al. EFFECT OF METAL CRYSTALLATION PERIOD ON PRODUCT QUALITY //Theoretical & Applied Science. – 2020. – №. 11. – С. 23-31.

a. Djahongirovich T. N., Muysinaliyevich S. N. Important features of casting systems when casting alloy cast irons in sand-clay molds //ACADEMICIA: An International Multidisciplinary Research Journal. – 2020. – Т. 10. – №. 5. – С. 1573-1580.

Turakhodjaev, N., Turakhujaeva, S., Turakhodjaev, S., Tursunbaev, S., Turakhodjaeva, F., & Turakhujaeva, A. (2020). Research On Heat Exchange In Melting Process. Solid State Technology, 63(6), 6653-6661.

Wang, Y., Liao, Y., Wu, R., Turakhodjaev, N., Chen, H., Zhang, J., ... & Mardonakulov, S. (2020). Microstructure and mechanical properties of ultra-lightweight Mg-Li-Al/Al-Li composite produced by accumulative roll bonding at ambient temperature. Materials Science and Engineering: A, 787, 139494.

TURAKHODJAEV, N., TURSUNBAEV, S., UMAROVA, D., KUCHKOROVA, M., & BAYDULLAEV, A. Influence of Alloying Conditions on the Properties of White Cast Iron. International Journal of Innovations in Engineering Research and Technology, 7(12), 1-6.

Nodir, T., Sherzod, T., Ruslan, Z., Sarvar, T., & Azamat, B. (2020). STUDYING THE SCIENTIFIC AND TECHNOLOGICAL BASES FOR THE PROCESSING OF DUMPING COPPER AND ALUMINUM SLAGS. Journal of Critical Reviews, 7(11), 441-444.

Турсунбаев, С. А., Зокиров, Р. С., & Тураев, Х. У. (2017). Влияние обработки деталей из алюминиевого сплава с применением высокоскоростных токарных станков на срок службы резца. In ТЕХНИКА И ТЕХНОЛОГИИ МАШИНОСТРОЕНИЯ (pp. 159-163).

Wang, Y., Zhong, F., Wu, R., Wu, H., Turakhodjaev, N., Kudratkhon, B., ... & Zhang, M. (2020). High-strength, ductility and modulus Al–Li/B4C composite with near nanostructure produced by accumulative roll bonding. Journal of Alloys and Compounds, 834, 155105.

Most read articles by the same author(s)

Turakhodjaev Nodir, Saidmakhamadov Nosir, Turakhujaeva Shirinkhon, Khaltursunov Erkin, Turakhujaeva Azizakhon, Akramov Mukhammadali, Development Of Technology To Increase Resistance Of High Chromium Cast Iron , The American Journal of Engineering and Technology: Vol. 3 No. 03 (2021)