YOSH OLIMLAR
ILMIY-AMALIY KONFERENSIYASI
in-academy.uz/index.php/yo
160
PRODUCT CERTIFICATION PROCESS: UZBEKISTAN, EUROPE, ASIA, AND
THE EXPERIENCE OF CIS COUNTRIES(2010-2025)
Olimov Jamshidbek Khurshid ogli
Fergana state technical university, Uzbekistan
https://doi.org/10.5281/zenodo.15550572
ABSTRACT
To ensure the safety of the consumers of product certification, and conformity to
simplify the process of international trade is important for the system to check the quality
standards. Every country has its own certification system based on the different requirements
in the domestic market, this will lead to certain differences in the process of international
trade. In this article, the range of years 2010-2025 uzbekistan in europe, asia and cis countries
in the development of the process of product certification, standards and legal requirements
applicable analysis. The results of the survey shows that it is necessary to ensure compliance
with global standards of products to international markets.Research used the method of
comparison and statistical analysis of documents.Shows the results of the survey, the
electronic certification system of product safety and in order to facilitate international trade
plays an important role. In addition, the combination of the system of certification and is
considered as an important factor in the process of international integration.
Keywords:
international standards, product certification, quality control, trade
regulyatsiyasi, Uzbekistan, europe, asia, CIS, JESUS, CEO, EAC, CCC.
Ключевые слова
: международные стандарты, сертификация продукции,
контроль качества, регулирование торговли, Узбекистан, Европа, Азия, СНГ, ИИСУС,
генеральный директор, EAC, CCC.
ACCESS
Protect the rights of consumers of product certification to ensure the quality of the
production and international trade plays a key role in the development of relations. If you
have an appropriate economic and legal system, each state has their own requirements for the
certification of this product determines access to different market opportunities.Today,
increasing competitive international markets and have been instrumental for product
certification.
Uzbekistan, CIS, asia and europe for the development of the certification system of the
state of different approaches have been applied.Fit has a positive impact on exports products
to international standards and economic development.
The company not only control the quality of the product, but also creates both the
opportunity for business to international markets.The results of this research producers and
consumers can be useful for regulyator organs.
Uzbekistan, europe, asia and cis countries in the development of the way if you have
specific product certification systems, in some countries, to ensure full compliance to
international standards if it is put in the other, while local legislation on the basis of special
requirements. The combination of increased volume of international trade in recent years
shows that it is necessary product certification system. Therefore, in this article, the range of
years 2010-2025 uzbekistan in europe, asia and cis countries in the process of product
YOSH OLIMLAR
ILMIY-AMALIY KONFERENSIYASI
in-academy.uz/index.php/yo
161
certification, the development of legal norms and their analysis is accepted with international
standards.
The main purpose of uzbekistan and in other regions of conformity to international
standards certification system to identify and assess the dynamics of change.This product of
research on the company to identify the existing problems, and future directions for
international development to adapt to the requirements of the analysis aims to identify the
process.The results of the survey enterprises, conformity assessment bodies and eksportyor
can be useful for.Certification will analyze the problems and ways to solve them in the system.
RESEARCH MATERIALS AND METHODOLOGY
The method is based on analysis and comparison of the research documents.
In the years 2010-2025 official statistics, reports of international organizations and
studied the changes in the legislation of uzbekistan.
The practical application of the system of product certification in the process of research
in different countries the order-rules, standards, and business to consumers and their effects
were studied in depth. Obyektivlik know to analyze real cases on the basis of principles of
research, asia, europe, the cis countries and the experience of mutual taqqoslandi.ISO IEC,
international organizations such as wto standards and legislation.
Uzbekistan, CIS, asia and europe, the countries of acts on the official certification
system.Academic articles, economic analysis and comments of international experts.Time of
the certification system on the development trends (2010-2025).A comparison of the
certification requirements in different countries.
Normative documents and legal information of the republic of uzbekistan research,
international organizations (JESUS, the wto, IEC), based on reports and in the case of
academic articles was analyzed.
Time of the certification system on the development trends (2010-2025) that determine
their economic effects were assessed.
DISCUSSION AND RESULTS
Product certification plays an important role in the global economic environment. This
process is the quality of the product, and ensure compliance with safety standards, both
fellow out of work creates the opportunity to international markets. In the last five years ten
(2010-2025) uzbekistan europe, asia and certification systems have evolved significantly in
the cis countries. In particular, the international JESUS, IEC, gost and other standards of the
integration process is accelerated.Although uzbekistan is developing a certification system
among the cis countries, the european union and asian countries when compared with the still
low level of digitization.As international experience shows, the environmental certification of
export products by 15-20% increase.
Uzbekistan's certification of the system, the gradual modernization and, for electronic
certification system, the introduction has been and quality control mechanisms was
strengthening. European Union while the products of the environment of clean, energy
efficiency and consumers rights protection to directed certification requirements strengthen.
Asian countries, especially China and South Korea, innovative technologies on the basis of
automated certification system was the development. CIS countries while the gost standards
of the international JESUS and IEC system the transition of trends were observed.
YOSH OLIMLAR
ILMIY-AMALIY KONFERENSIYASI
in-academy.uz/index.php/yo
162
State/Syst
em
of main
certificatio
n system
2010-2015
2016-2020
2021-2025
Conclusion
and prospects
Uzbekistan
,
OJESUS,
HACCP,
EAC
, iso 9001
adaptation
begin
“Technical
aspect from a
regulated
material,” the
law received
was
Electronic
certification
system
developed, EA
standards deal
near
International
certification
system into
full
integration of
the process to
continue
continues
the
european
Union
CEO, iso
9001, iso
14001,
GMP
Environmenta
lly clean
products
certification
of the severity
of online
trading
products for
new
standards and
the
introduction
of it has been
AI Io products
for certification
system
developed has
New
technologies
and
environmenta
l standards,
attention has
increased
and china
CCC, CEO,
FDA, JESUS
the internal
market, the
ccc for the
certificate of
the severity
Export for the
international
certificate
requirements
attention
given to
Electronic
certification
system full
path to put the
World market
requirements
adaptation
process to
continue
continues
the
japanese
JIS, Ps that
Electronics
and
automobiles
in the field of
international
certification
enhanced
Green energy
products for
new
standards
developed has
the io and
smart
technologies
for the new
certificate
system has
been created,
New
technologies,
regulations
governing
standards of
the
introduction
is
South
Korea
KC, JESUS
the internal
market in
quality
control
enhanced
Export
products for
an
international
certification
system
expanded
the certificate
to get the
process of
automation
Product safety
and
environmenta
l standards
important for
the design
direction into
the cis
(Russia,
Kazakhsta
EAC JESUS
GOST
Internal
market for
single EAC
International
certification
system to
E - certificate
system
working out of
the cis
countries for
the overall
YOSH OLIMLAR
ILMIY-AMALIY KONFERENSIYASI
in-academy.uz/index.php/yo
163
n, Belarus)
system launch
has put
adapt will
start
certification
system
strengthens
Table 1. 2010-2025 years in various states in the product certification system development.
Conclusion:
the results of research the main purpose – product certification international experience of
the study, its commercial and industrial development, the effects of determine and work out
the optimum certification model is recommended from is.
Uzbekistan, Europe, Asia and CIS countries, product certification system on out and go
research that shows, this process each a region of economic, legal and technological
development level depends on without occurs. Europe state that jesus and the CEO as
international standards introduction , that is, CIS countries, local regulations and certification
systems dominate the will. In uzbekistan , while in recent years the international standards to
fit , which comes certification of the system development, particular attention is paid.
2010–from 2025-years over the certification process in a number of important changes
were observed. In particular, international trade requirements to adapt in order to
uzbekistan, quality control improved, the product safety on the legislation has been improved
and the electronic certification system for the introduction was. New technologies, in
particular, artificial intelligence (AI) and Nesnalar the internet (Io) for special certification
system working out I started. This with along, environmental certification requirements
increase, international standards, compliance with the issue of critical importance acquires
continues.
Analysis that shows, product certification system bettering not only the internal market
of safety to ensure, but also the international trade involved the expansion also service makes.
For this reason, certification of the system, the full digitization and automation, data base
integration and international cooperation expansion in the coming year, the priority tasks of
one to remain. Also, small and medium business for certification requirements , simplifying
also important priorities of the one is.
In the future, e - commerce and online trading products for new certificate of the system
introduction to product safety and quality to ensure the service will. Uzbekistan international
market to capacity expansion and advanced technologies certification system applied of this
process, the main factors of one to remain.
Uzbekistan for certification in the system of digital technologies, further development
should be.
International standards, conformity increase to additional legal and technical reforms
required are.
References:
Используемая литература:
Foydalanilgan adabiyotlar:
1.
Of the republic of uzbekistan “on certification of products and services”law. – Tashkent,
2021.
2.
The president of the republic of uzbekistan “on the modernization of the system of
certification and quality assurance” will decide. – Tashkent, 2022.
YOSH OLIMLAR
ILMIY-AMALIY KONFERENSIYASI
in-academy.uz/index.php/yo
164
3.
Of the republic of uzbekistan standardization, metrology and certification agency.
“Product certification procedure.” – Tashkent, 2023.
4.
JESUS (the international organization for Standardization). “Iso 9001: quality
management systems – requirements.” – Geneva, Switzerland, 2015.
5.
International electrotechnical commission (iec). “Conformity assessment systems and
schemes.” – Geneva, Switzerland, 2021.
6.
The world trade organization (WTO). “The agreement on technical barriers (tb
agreement).” – Geneva, Switzerland, 2018.
7.
European Commission. “CEO mark for your products: a guide to the european standard.”
– Brussels, 2020.
8.
Eurasian Economic Commission. “Your rule requirements and eac mark.” – Moscow,
2021.
9.
China compulsory Certification (CCC). “CCC Certification was against the guidelines.” –
Beijing, 2019.
10.
B. K. Karimov. “The economic importance of product certification and compliance with
international standards.” – Tashkent: Fan, 2023.
