INTERNATIONAL MULTIDISCIPLINARY JOURNAL FOR
RESEARCH & DEVELOPMENT
SJIF 2019: 5.222 2020: 5.552 2021: 5.637 2022:5.479 2023:6.563 2024: 7,805
eISSN :2394-6334 https://www.ijmrd.in/index.php/imjrd Volume 12, issue 08 (2025)
87
ADVANTAGES OF IMPLEMENTING IATF 16949 QUALITY MANAGEMENT
SYSTEM IN THE AUTOMOTIVE INDUSTRY
Mamajonov Abduvoxid Abdurakhmonovich
Andijan State Technical Institute
ASSOCIATE PROFESSOR
Sotvoldiyeva Nasibakhan Sahibjamol qizi
ASSISTANT
Abstract:
IATF 16949 (formerly IATF 16949) is an international industry standard and
technical specification. The standard describes the requirements for the quality management
systems of companies involved in the design, development, production, installation and
maintenance of automotive products.
Keywords:
IATF 16949, product, quality, enterprise, standard.
Relevance of the topic: the increasing share of the automotive industry in the national economy
and industrial production, the automotive industry being the most competitive industry in the
world, radical quality improvement to ensure competitiveness (70% of the value and quality of
a car is created at enterprises supplying components), the expansion of the geographical
location of the automotive industry (cars are produced in the cities of Asaka, Samarkand,
Khorezm, Tashkent), the competitive environment in the automotive industry requires the
introduction of modern quality management requirements and certification:
- reduce supply chain costs;
- introduction of international quality management requirements;
- continuous improvement of the quality management system and rational use of resources [1].
The rapid development of the automotive industry in Uzbekistan is mainly due to the launch of
joint ventures and the expansion of their activities. The number of such enterprises is increasing
day by day, and talented young people of our country are working in them. The requirements
for products and production itself are considered “normal” requirements for auto giants. These
requirements are mainly reflected in their internal quality standards for automobile production
and compliance with international standards.
Currently, more than 1,500 enterprises in the republic have developed and implemented quality
management systems that comply with international standards at the international and national
levels, and have successfully obtained certificates.
The need for automobile manufacturers to comply with international standards and implement a
quality system based on international standards, in turn, imposes a number of requirements on
their component suppliers. The implementation of the requirements of the international standard
IATF16949:2009 and its additional guidelines was considered one of these problems.
Developing and implementing a quality management system based on the requirements of the
international standard IATF16949:2016 is one of the most important issues facing enterprise
management in order to increase competitiveness and profitability.
A distinctive feature of the application of IATF 16949 is the requirement for organizations to
use a number of tools:
• APQP (Advanced product quality planning) - advanced product quality planning and
management plan.
• PPAP (Production part approval process) - Component production approval process.
• FMEA (Failure mode and effects analysis) - Analysis of potential failure modes and effects.
INTERNATIONAL MULTIDISCIPLINARY JOURNAL FOR
RESEARCH & DEVELOPMENT
SJIF 2019: 5.222 2020: 5.552 2021: 5.637 2022:5.479 2023:6.563 2024: 7,805
eISSN :2394-6334 https://www.ijmrd.in/index.php/imjrd Volume 12, issue 08 (2025)
88
• SPC (Statistical Process Control) - Statistical Process Control.
• MSA (Measurement System Analyses) - Analysis of measurement systems.
This feature was inherited by IATF 16949 from the American standard QS-9000. The most
common modern methods of APQP, PPAP, FMEA, SPC, MSA are actually the refined
methods of the American automotive school QS-9000.
However, the use of QS-9000 methods is not mandatory and organizations may, in agreement
with the consumer, use other tools that include similar requirements, such as the methods of the
German Automobile Association (VDA) [2].
Compliance with the requirements of the IATF 16949 standard has certain advantages.
• Reduce waste and reduce defects. The implementation of this point is based on the
introduction of a process approach. Thanks to its use, the enterprise is able to increase the
efficiency of production processes, as a result of which the amount of defective products
produced and the cost of resources and time are reduced.
• License for trade operations. Certification is a mandatory condition of trade relations for
almost all automotive companies, as this system greatly facilitates doing business, as it is
recognized all over the world.
• Ease of use and flexibility. Since IATF 16949 is based on the IATF 9001 standard, it can be
easily integrated with other management systems such as OHSAS 18001 and IATF 14001. As a
result, implementing IATF 16949 requires much less financial and time investment, while
providing good prospects for further business development.
• Maintaining a good brand reputation. The organization's partners and customers are interested
in confirming the quality of the manufacturer's products. Therefore, the presence of a certificate
of compliance with the requirements of IATF 16949 leads to consistently high product quality
and demonstrates the stability of the supplier company.
• Reduce costs by eliminating the need for duplication. Obtaining IATF 16949 compliance
certification helps to exempt you from obtaining similar documents such as EAQF, AVSF, QS-
9000, etc. Also, second and third party audits are optional [3,4].
List of used literature:
1. IATF 9000:2005 Quality Management System. Basic regulations and terms.
2. UzDSt IATF 16949:2011 Quality management system. Specific requirements for the
application of ISO 9001:2008 to automotive industry and component manufacturers.
3. IATF 16949:2009 (R) (Third Edition), Quality Management System. "Specific Requirements
for IATF 9001:2008 for Suppliers of Components and Materials in the Automotive Industry"
Technical {'} 2009-06-15.
4. UzDSt ISO 9000:2009 Quality Management System. Basic regulations and terms
