Volume 15 Issue 07, July 2025
Impact factor: 2019: 4.679 2020: 5.015 2021: 5.436, 2022: 5.242, 2023:
6.995, 2024 7.75
http://www.internationaljournal.co.in/index.php/jasass
182
METROLOGICAL SUPPLY SYSTEM IN INDUSTRIAL ENTERPRISES: PROBLEMS
AND SOLUTIONS
Turdiyev Azizbek Ibragimovich
Head of the Samarkand branch of the State Institution
"National Institute of Metrology of Uzbekistan"
Abstract:
This in the article industry in enterprises metrological supply system current problems
and their solution to grow roads seeing Metrological
supply system working release
processes quality and efficiency in providing important importance has to be, measure of tools
novelty, calibration process, qualified of human resources and digital technologies current to be
such as main factors analysis Problems are solved. identify and eliminate to grow according to
practical recommendations working issued are, they are industry in enterprises metrological of
service quality to improve service does.
Keywords:
metrological
supply system, industry enterprises, measurement tools, metrological
service, digital technology, quality control, manufacturing release efficiency.
Introduction.
Today on the day industry enterprises working release processes high quality and
efficiency with provide for modern technologies and equipment wide Such processes are being
used success and many in terms of of measurements accuracy and reliability related to.
Metrology — measurements theory and practice is, it is in the industry product quality guarantee,
technological processes management and competitiveness product in creation important
importance profession Industry
in enterprises metrological supply system measurement of
tools selection, them calibration, certification, repair and maintenance control to do processes
own inside This system through working in the output everyone in stages clear and reliable
measurements done is increased, this and working issued of products to standards suitable to
come provides.
But many in enterprises metrological supply system his/her own perfect at the level not, and this
situation working release in the processes quality and efficiency to decrease take is coming.
Outdated measurement tools, qualified personnel lack of calibration systematic accordingly done
and modern digital technologies
inability to implement - these industry metrology main
problems This relation is with, industry in enterprises metrological supply system improvement,
problems identify and
effective solutions on work today's on the day working release
processes quality improvement and international market requirements answer to give for big
importance has. This in the article industry in enterprises metrological supply system main
problems analysis made, they eliminate to grow according to practical recommendations
presented is being done.
Metrological supply system industry of enterprises quality and efficiency in providing main from
the columns one My point of view I think it’s metrological. of service effective performance not
only measurement of tools technician to the situation, maybe of the system whole organization to
be completed It depends. This is only technician from updates consists of not, maybe personnel
preparation, interior management processes, as well as modern digital technologies current to do
through done increase need.
Today on the day industry in the field many problems existence, especially metrological services
in the field clear reflection are being done. Obsolete equipment, enough to the qualification has
Volume 15 Issue 07, July 2025
Impact factor: 2019: 4.679 2020: 5.015 2021: 5.436, 2022: 5.242, 2023:
6.995, 2024 7.75
http://www.internationaljournal.co.in/index.php/jasass
183
not been to experts and standards suitable not coming working release process to the quality
negative impact Therefore, metrological supply system improvement according to complex
I also need to understand the importance of modern digital technologies, especially IoT and
automated monitoring systems. metrology in the field revolution to make to the possibility I
think I have. With the help of these technologies measurement of tools status in real time
monitored and malfunctions on time identified, their prevent to take opportunity increases. This
is working of release continuity and product of quality high at the level to be provides.
A metrological supply system encompasses all activities, resources, and procedures involved in
providing, maintaining, and verifying measuring instruments and systems within an industrial
enterprise. It includes procurement of measurement devices, calibration and verification,
maintenance, documentation, and training of personnel.
Key Components:
Measurement instruments and devices
Calibration laboratories and standards
Qualified personnel and training programs
Documentation and record keeping systems
Regulatory and quality assurance frameworks
An effective metrological supply system is indispensable for industrial enterprises aiming to
maintain product quality, optimize processes, and ensure compliance with regulatory standards.
While challenges like inadequate calibration, obsolete equipment, and fragmented management
are common, these can be overcome through systematic improvements in calibration practices,
investment in technology, personnel training, and centralized control.
Literature analysis.
Metrological supply system importance and its industry in enterprises place
about scientific and practical in literature wide on a scale research take visited. Many research
metrology working release in the processes quality control in doing role For example, A.
Kadyrov (2020 ) emphasizes metrological equipment regular calibration and certification to do
system product quality and performance release to the efficiency positive impact about wide
illuminates.
Also, Z. Rakhimov (2019 ) at work metrological of services modern industry in enterprises
organization management and administration according to practical recommendations gives.
Author industry in enterprises there is problems to define, mainly outdated measurement tools
and experts qualification low such as main obstacles International standards and their current
to be to the issues related In studies, for example, J. Smith (2021) found that ISO 9001 and
ISO/IEC 17025 standards metrological supply systems in improvement role emphasized. In these
studies enterprises to standards suitable arrival through product quality improvement and
international at the market competitive to be opportunities expansion possibility is displayed.
From this except, last in the years based on digital technologies and IoT (Internet of Things)
metrological of services development about many articles are being published. For example, S.
Karimov (2023) in his digital calibration in the article systems advantages and their industry to
enterprises current to grow their ways analysis This research
shows that metrological
processes automation human factor reduce the measurements accuracy and continuity provides.
With this together, Uzbekistan practical to experience dedicated in the works industry in
enterprises metrological the service improvement for state by support, especially training
Volume 15 Issue 07, July 2025
Impact factor: 2019: 4.679 2020: 5.015 2021: 5.436, 2022: 5.242, 2023:
6.995, 2024 7.75
http://www.internationaljournal.co.in/index.php/jasass
184
centers organization and international
partnerships develop necessity In this regard, M.
Usmanov (2022) and others by written articles our country industry metrological supply new to
the stage take to go out aimed at suggestions own inside takes.
In general, when taking, there is literature industry in enterprises metrological supply system
efficiency increase for modern technologies current to bring in experts training and international
to standards adaptation importance shows. However, the same at the time national in industry
this in the field still solution to be done necessary was many problems The existence is also
obvious. visible is standing.
Research methodology.
This in the article industry in enterprises metrological supply system
problems and their eliminate to grow their ways determination for the purpose following
research methods First of all, the topic according to there is scientific sources, normative
documents, international and national standards, as well as the latest scientific articles analysis
At this stage metrological supply system theoretical basics, available problems and advanced
experiments studied.
Industry of enterprises metrological service departments employees, specialists and managers
between questionnaire and personal conversations organization was made. Through this in the
system practical problems, measurement tools status, calibration processes and of experts
qualification level about information gathered.
Table 1. Industry in enterprises metrological supply system main problems and their eliminate to
grow roads
Home problems Reasons
Effects
Offer done solutions
Outdated
measurement tools
Equipment to wear
out, to renew lack of
funds
Measurements
wrong
output, product quality
decrease
Modern equipment buy
take, technical service to
show improve
Calibration
process wrong or
delay
Calibration
table
violation,
qualified
personnel shortage
Measurements
insecurity,
quality
control weakness
Calibration
process
systematic organization to
be
qualified
experts
preparation
Staff qualification
low
Education
and
qualifications increase
system weakness
Modern
technologies
complete
hand
not
getting
State and enterprise by
qualification
increase
courses organization to
grow
Digital
technologies
current not enough
Innovative
to
technologies
investment shortage
Production in the release
human factor errors,
processes
efficiency
decrease
IoT
and
automated
systems implementation to
grow
International
to
standards suitable
not coming
To standards related
knowledge shortage of
resources limitedness
Products international at
the market competitive
not being
ISO standards current
management
and
administration
system
improvement
Volume 15 Issue 07, July 2025
Impact factor: 2019: 4.679 2020: 5.015 2021: 5.436, 2022: 5.242, 2023:
6.995, 2024 7.75
http://www.internationaljournal.co.in/index.php/jasass
185
Selected industry in enterprises metrological real state of processes studied, measured of tools
use term, calibration frequency and maintenance practice analysis This is done. in the system
shortcomings to determine opportunity gave. Collected questionnaire results and follow-up
information statistic methods using analysis was done. Obtained results based on of problems
main reasons and their solution to grow directions Research to the results based on industry
in enterprises metrological supply system to improve aimed at clear practical recommendations
and solutions offer This was done. offers modern technologies current to recruit, to recruit
qualification improvement and standards compatibility to provide directed.
Research discussion.
Research results showed that the industry in enterprises metrological
supply system efficiency one row problems under the influence is decreasing. The most main
problem — measurement of tools outdated and insufficient regular uncalibrated This is
situation working release in the processes of accuracy decrease and as a result product of quality
to slow down take is coming. Questionnaire and practical observations this showed that the
measurement of tools most of designated from deadlines delayed without calibrating or in
general calibration process This is not being done. and industry of enterprises metrological to
supply was in the approach main from gaps one as is seen.
Also, experts qualification level and qualification increase system also serious attention worthy
problem become came out. Many in enterprises metrology according to employees enough at the
level qualification increase to the possibility has no, this and in practice new methods and
technologies current to reach obstacle This is
situation of the system effective to work
negative impact shows, because modern metrological service high qualified personnel without
participation impossible.
Research during It was found that many industry digital technologies and automation in
enterprises metrological systems current This is not true. and human from the factor come
outgoing mistakes increases and measures of the results continuity to provide makes it difficult.
Modern IoT technologies based on working issued monitoring systems and measurement of tools
status realistic at the time to monitor, troubleshoot early to determine opportunity gives, this and
working release process stability increases.
From this in addition, in research metrological supply system international to standards
adaptation importance determined. Such as ISO 9001 and ISO/IEC 17025 of standards
implementation not only product quality increases, maybe to enterprises international market
requirements answer to give opportunity creates. However, in practice this to standards in
adaptation many enterprises various to difficulties face is coming, this and government and
industry of the management metrological the field develop according to additional measures
demand does.
In general, in short, research results industry in enterprises metrological supply system improve
for following in directions work the necessity shows : measurement tools update and regular
calibration, specialists qualification increase, digital and automated systems current to grow and
international to standards adaptation. This measures industry competitiveness increase, develop
release quality improvement and economic efficiency in providing important factor will be.
Conclusion.
Industry in enterprises metrological supply system working release processes
quality ensuring and efficiency in increasing important importance has. Research results this
showed that the system main problems as outdated measurement tools, calibration processes
continuous not, experts qualification low and modern digital technologies enough current
Volume 15 Issue 07, July 2025
Impact factor: 2019: 4.679 2020: 5.015 2021: 5.436, 2022: 5.242, 2023:
6.995, 2024 7.75
http://www.internationaljournal.co.in/index.php/jasass
186
insufficiency separated This is
disadvantages working release to the quality negative impact
showing, enterprises competitiveness reduces.
Problems eliminate to grow for measurement tools update, calibration processes regular and
systematic done training, specialists qualification increase and modern automated and digital
technologies current to grow necessary. Also, international to standards adaptation metrological
of the system quality increase and develop release processes to optimize help gives.
As a result, metrological supply system perfect performance industry of enterprises
competitiveness reinforcement, product quality high at the level storage and production release
efficiency increase for main factor is considered. This therefore, this in the field systematic
measures acceptance to do and them done increase industry in development important
importance profession will reach.
References
1.
Kadyrov, A. (2020).
Industry metrology and quality Tashkent
: Technology
publishing house.
2.
Rakhimov, Z. (2019). Industry in enterprises metrological of services organization
Technology
and management.
Journal,
4(2), 45-52.
3.
Smith, J. (2021). Implementation of ISO 9001 and ISO/IEC 17025 standards in industrial
metrology.
International Journal of Metrology,
35(1), 23-38.
4.
Karimov, S. (2023). Digital metrology systems advantages and current
Innovation
Technologies,
12(3), 67-74.
5.
Usmanov, M. (2022). In Uzbekistan industry metrology develop prospects.
National
industry analyses,
7(1), 12-20.
6.
ISO 9001:2015.
Quality management systems — Requirements.
International
Organization for Standardization.
7.
ISO/IEC 17025:2017.
General requirements for the competence of testing and
calibration laboratories.
International Organization for Standardization.
