STUDY OF THE EXPLOITATIVE PROPERTIES OF THE DEVELOPED ADDITIVES AND THEIR APPLICATION
Keywords:
Abstract
Naphthalene additives, as indicated in the literature review, are classified as detergent additives. Additives of this type are primarily used in engine oils. It is known that the composition of the “D” group oil should include an effective package of additives to achieve the level of performance properties, which ensures long-term performance of the most forced engines especially in severe operating conditions. To date, there is no universal method for assessing the behavior of oil at high temperatures, therefore oil is usually tested via several (laboratory and stand) methods. For example, in domestic practice, a four-stage system for determining the quality of newly created (experimental) oil products is provided.
Similar Articles
-
New Range Of Raw Silk Twisted Threads
The American Journal of Engineering and Technology: No. 11 (2020) / Khalima Alimovna Alimova, Khalima Khabibullaevna Umurzakova, Jakhonjir Adxamovich Akhmedov, Dilafruz Uktamovna Aripdjanova, Jurabek Shomil Ogli Sharipov, -
Understanding The Levenshtein Distance Equation For Beginners
The American Journal of Engineering and Technology: No. 06 (2021) / Abdurakhmanova Umida Rustamovna, -
Ways Of Foam Concrete Production Development
The American Journal of Engineering and Technology: No. 7 (2021) / Abdullaev U.M., Abdullaev I.N., -
Significance And Harmful Effects Of Some Heavy Metals Present In Food For The Metabolic Process
The American Journal of Engineering and Technology: No. 09 (2020) / Sevara Tojimatovna Yulchiyeva, Shaxnoza Davlatovna Hudoyberdiyeva, -
Building Chatbot System To Route Chatbot Conversation To A Human Operator, When Bot Don't Understand An Intent, With Help Of Distributed Data Analysis
The American Journal of Engineering and Technology: No. 05 (2021) / Boltayev B. R., Xujayev O.K,
References
A.M. Kulinowski, T.J. Henly, P. Growcott, Diesel fuel additives to meet worldwide performance and emissions requirements, in: SAE Tech. Pap., 1993. https://doi.org/10.4271/932737.
A. Leedham, R. Caprotti, O. Graupner, T. Klaua, Impact of fuel additives on diesel injector deposits, in: SAE Tech. Pap., 2004. https://doi.org/10.4271/2004-01-2935.
Y. Liu, C. Wang, J. Yan, W. Zhang, W. Guan, X. Lu, S. Li, Hydrogen peroxide-independent production of α-alkenes by OleT JE P450 fatty acid decarboxylase, Biotechnol. Biofuels. (2014). https://doi.org/10.1186/1754-6834-7-28.
E.S. Tarleton, J.P. Robinson, J.S. Low, Nanofiltration: A technology for selective solute removal from fuels and solvents, Chem. Eng. Res. Des. (2009). https://doi.org/10.1016/j.cherd.2008.09.006.
