Prospects For The Use Of Polymer Composite Fittings In Building Structures In The Republic Of Uzbekistan

Ashurov  Muftoxiddin; Sadirov Bahrom  Tursunalievich; Хaydarov Abduхalil  Mutalib Ogli; Ganiyev Akbar  Asiljon Ogli; Sodikhonov Sardorhon   Sobirkhon Ogli; Khaydarova Kholishon  Qodirali Qizi

doi:10.37547/tajet/Volume03Issue06-17

Authors

Ashurov Muftoxiddin
Senior Lecturer, Department Of Construction Of Buildings And Structures, Fergana Polytechnic Institute, Fergana, Uzbekistan
Sadirov Bahrom Tursunalievich
Assistant, The Department Of Construction Of Buildings And Structures, Ferghana Polytechnic Institute, Ferghana, Uzbekistan
Хaydarov Abduхalil Mutalib Ogli
Assistant, The Department Of Construction Of Buildings And Structures, Ferghana, Uzbekistan
Ganiyev Akbar Asiljon Ogli
Assistant, The Department Of Construction Of Buildings And Structures, Ferghana Polytechnic Institute, Ferghana, Uzbekistan
Sodikhonov Sardorhon Sobirkhon Ogli
Master's Student Of Fergana Polytechnic Institute, Fergana, Uzbekistan
Khaydarova Kholishon Qodirali Qizi
Master's Student Of Fergana Polytechnic Institute, Fergana, Uzbekistan

DOI:

https://doi.org/10.37547/tajet/Volume03Issue06-17

Keywords:

Polymer composite reinforcement steel fittings concrete composite material construction industry

Abstract

The article discusses the prospects for the use of polymer composite fittings in building structures and the use of alternative materials to replace steel in the construction industry.

References

HP Andrae, O. Kusch. Carbon fiber compositions. New generation ray for cement and precast tendons // Proceedings of the 2nd All-Russian Conference on Concrete and Reinforced Concrete "Concrete and Reinforced Concrete - Ways of Development". S. 335-546.

TR 013-1-04. Technical recommendations for the use of non-metallic composite reinforcement in concrete structures. M .: NIIZhB, 2004.5s.Tolkin, A. (2020). Reconstruction of 5-storey large panel buildings, use of atmospheric precipitation water for technical purposes in the building. The American Journal of Applied sciences, 2(12), 86-89.

Ogli, A. U. A., Ogli, Х. A. M., & Mirzajonovich, Q. G. (2020). Hazrati Imam Architecture The Complex Is A Holiday Of Our People. The American Journal of Engineering and Technology, 2(11), 46-49.

Mirzajonovich, Q. G., Ogli, A. U. A., & Ogli, Х. A. M. (2020). Influence Of Hydro Phobizing Additives On Thermophysical Properties And Long-Term Life Of Keramzit0betona In An Aggressive Medium. The American Journal of Engineering and Technology, 2(11), 101-107.

Ogli, Х. A. M., Ogli, A. U. A., & Mirzajonovich, Q. G. (2020). Ways Of Implementation Of Environmental Emergency Situations In Engineering Preparation Works In Cities. The American Journal of Engineering and Technology, 2(11), 108-112.

Djurayevna, T. N. (2020). Influence Of Surface Additives On Strength Indicators Of Cement Systems. The American Journal of Applied sciences, 2(12), 81-85.

Djurayevna, T. N. (2020). Building Materials Determined In The Architectural Monuments Of Central Asia. The American Journal of Applied sciences, 2(12), 77-80.

Хaydarov Abduхalil Mutalib Оgli, Development of effective cement additives for the production of heat-resistant concrete based on technogenic waste “International Journal of Researchculture Society” India (2019. 12. 12).

Mirzaahmedov, A. T. (2020). Accounting For Non-Linear Work Of Reinforced Concrete In The Algorithms Of Calculation And Design Of Structures. The American Journal of Engineering and Technology, 2(11), 54-66.

Mirzaahmedov, A. T. (2020). Algorithm For Calculation Of Multi Span Uncut Beams Taking Into Account The Nonlinear Work Of Reinforced Concrete. The American Journal of Applied sciences, 2(12), 26-35.