Theoretical Study Of The Movement Of Single And Systemic Seeds Along The Grate Of A Saw Gin With A Concave Profile
Keywords:
Abstract
The article examines a practical and theoretical study of the process of separating seeds from saw gin with installed grates with a concave profile proposed by us, in contrast to the existing grates.
Improving the efficiency of the process of separating the fibre from cotton seeds by improving the working chamber of the gin is one of the important issues. The main way to increase the efficiency of sawn gin is to increase the fibre content in the mass of seeds in the working chamber with a uniform decrease in its density. This can be achieved by using grates with a concave working surface, which serves to move the seeds away from the rotating saws and accelerate the release of bare seeds from the working chamber. The article discusses the movement of seeds on the concave surface of the grate and determines the rational parameters of their working part.
Similar Articles
-
Mining Instructive Information To Arrange Student's Execution Utilizing R Devices
-
Adaptive Method For Eliminating Noise Of Image
The American Journal of Engineering and Technology: No. 12 (2020) / Beknazarova Saida Safibullaevna, Jaumitbayeva Mexriban Karamatdin Qizi , Bekmirzaeva Maftuna Shaimardanova , Alimukhamedova Madina Erkinovna , -
RESEARCH OF THE MECHANISM OF ACTION OF THE PROTECTIVE PROPERTIES OF INHIBITED COMPOSITIONS
The American Journal of Engineering and Technology: No. 02 (2022) / Alimova Zebo Xamidullayevna , Niyazova Gulhayo Parpiyevna , -
Calculation Of The Required Capacity Of The Solar Collector In The Combined Heating System Of Buildings, Selection Of The Model And Evaluation Of Cost-Effectiveness
The American Journal of Engineering and Technology: No. 04 (2021) / D.Sobirova , M.Karimova, А. Gulomov, -
Optimization Of The Brake Chamber Housing Construction Material
The American Journal of Engineering and Technology: No. 05 (2021) / Jamshed Sadulloyevich Avliyokulov, Muzaffar Ruzimakhamatovich Alimov, -
Selection Of Flow Diagrams Of The Adjustable Thyristor Asynchronous Electric Actuator With Phase Control
The American Journal of Engineering and Technology: No. 11 (2020) / Nematjon Akhmatovich Samatov, -
About One Algorithm For Generating Reference Data In Pattern Recognition
The American Journal of Engineering and Technology: No. 04 (2021) / Gulomjon Primovich Juraev, -
ASSURANCE SUPPORT DEVICE FOR COLOMBO RESERVOIR CONDUIT PLAN WATER VIEWPOINT RECOGNITION
The American Journal of Engineering and Technology: No. 06 (2022) / Y.A. Perera, R.M. Surenth, -
Execution Hope As A Determinant For Distributed Computing Acknowledgment In Kenyan Public Universities
The American Journal of Engineering and Technology: No. 01 (2021) / P. Ikoha Anselemo , -
Ideal Plan Of Supported Cement Rectangular Sections Exposed To Hub Pressure And Biaxial Bowing Minutes
References
Sarimsakov, A. I. Karimov R. Murodov. (2012). Static calculation of processes in the roll box of the saw gin. Problems of Mechanics, No. 2.
Kh. T. Akhmedkhodjaev, A.I. Karimov, M. Tojiboyev, H. Sharipov. (2013). Determination of the static balance of forces affecting seeds moving along grates with a convex profile. Scientific and technical journal of the Ferghana Polytechnic Institute. No. 2.
Kh. T. Akhmedkhodjaev, A.I. Karimov, M. Tojiboyev, H. Sharipov. Theoretical analysis of the movement of seeds along the grate with a convex profile. Scientific and technical journal of the Ferghana Polytechnic Institute. 2018, No. 3.
Abdusamat, K., Mamatovich, A. S., & Muhammadziyo, I. (2014). Mathematical Modeling of the Technological Processes Original Processing of Cotton. International Journal of Innovation and Applied Studies, 6(1), 28.
Akramjon, S., Rustam, M., Akmal, U., & Dilmurat, K. (2018). Movement Differential Equation of Seed Roller which Has Been Installed Stake Accelerator on the Roll Box of Gin Machine. Engineering, 10(8), 521-529. https://doi.org/10.4236/eng.2018.108038.
Akmal, U., Khamit, A., Akramjon, S., & Muazzam, K. (2018). The Saw Gin Stand with Adjustable Movement of the Roll Box. Engineering, 10(08), 486. https://doi.org/10.4236/eng.2018.108034.
Axmedxodjayev, K., Umarov, A., & Ortiqova, K. (2019). Investigation of the Ginning Process on ДП Series Saw Gin Stands. Engineering, 11(08), 523. https://www.scirp.org/journal/eng.
Khayrullo Sharipov, Khamit Akhmetxodjayev, Botir Mardonov. (2019). Theoretical studies of the movement of a single sustem along grates with a conceve gin profile. The problemes of mexanical. 4, 55-58.
Botir Mardonov, Khayrullo Sharipov, Khamit Akhmetxodjayev. (2019). Study of the law of motion of a single seed on the rib. The problemes of textile. 4, 42-50.
Khayrullo Sharipov, Khamit Akhmetxodjayev, Mukhammadjon Tadjibayev. (2019). The mathematical model of seed movement on a concave profile rib of saw jin stand. Scientific and technical journal of Namangan institute of engineering and technology. 4, 19-29.
Khayrullo Sharipov, Khamit Akhmetxodjayev, Mukhammadjon Tadjibayev. (2019). Practical and theoretical study of the process of separating seeds from advanced gin. Scientific and technical journal of Namangan institute of engineering and technology. 3, 14-19.
Sharipov, K., Akhmedxodjayev, K., Tojiboyev, M., & Sarimsakov, O. (2020). The Mathematical Model of Seed Movement on a Concave Profile Rib. Engineering, 12(03), 216.
Akramjon, S., Rustam, M., Akmal, U., & Dilmurat, K. (2018). Movement Differential Equation of Seed Roller which Has Been Installed Stake Accelerator on the Roll Box of Gin Machine. Engineering, 10(8), 521-529.
Akmal, U., Khamit, A., Akramjon, S., & Muazzam, K. (2018). The Saw Gin Stand with Adjustable Movement of the Roll Box. Engineering, 10(08), 486. https://doi.org/10.4236/eng.2018.108034.
Axmedxodjayev, K., Umarov, A., & Ortiqova, K. (2019). Investigation of the Ginning Process on ДП Series Saw Gin Stands. Engineering, 11(08), 523.
Umarov, A. A. (2018). A saw gin with a system for controlling the density of a seed roll. Scientific-technical journal, 22(1), 52-57.
Abduvakhidov, M.A., & Umarov, A.A. (2008). Research of speed regulation of electric drives of gin feeders. Natural and technical sciences, (2), 328-329.
Akramjon, S., Rustam, M., Akmal, U., & Dilmurat, K. (2018). Movement Differential Equation of Seed Roller which Has Been Installed Stake Accelerator on the Roll Box of Gin Machine. Engineering, 10(8), 521-529. https://doi.org/10.4236/eng.2018.108038.
Umarov, A., Ortikova, K., & Sarimsakov, A. (2020). Analysis of Speeds of Cylinders of Saw Gins and Linters and Determination of Critical Frequencies for them. Engineering, 12(10), 715. https://doi.org/10.4236/eng.2020.1210050.
Sarimsakov, A., Muradov, R., & Mardonov, B. (2020). Modeling Of the Process of Interaction of the Saw Cylinder with the Raw Material In The Process Of Ginning. TEST Engineering and Management (Scopus) May-June, 27386-27391.
Sarimsakov, A. U., Ahmedov, B., & Abdullajanov, B. (2020). To Study Circling Of The Seed Roller At Ginning Process With Practical Method. The American Journal of Engineering and Technology, 2(11), 142-148. https://doi.org/10.37547/tajet/Volume02Issue11-22.
Sarimsakov, A. U., & Ergashev, J. F. (2020). Modelling the motion of a mixture with weighty particles in a stationary flow of liquid. SAARJ Journal on Banking & Insurance Research, 9(6), 20-24. https:// doi: 10.5958/2319-1422.2020.00035.1
