Authors

  • Fakhriddin Gafurovich Khomidov
    PhD Student, Institute Of General And Inorganic Chemistry Of Academy Of Sciences Of The Republic Of Uzbekistan
  • Zulayho Raimovna Kadyrova
    Doctor Of Chemical Sciences, Professor, Institute Of General And Inorganic Chemistry Of Academy Of Sciences Of The Republic Of Uzbekistan
  • Khikmatulla Lutpullayevich Usmanov
    Candidate Of Technical Sciences, Institute Of General And Inorganic Chemistry Of Academy Of Sciences Of The Republic Of Uzbekistan
  • Shokhista Mansuraliyevna Niyazova
    PhD, Institute Of General And Inorganic Chemistry Of Academy Of Sciences Of The Republic Of Uzbekistan

DOI:

https://doi.org/10.37547/tajiir/Volume03Issue06-11

Keywords:

Calcium aluminate sol-gel method alumina containing waste, phase transformations X-ray analysis crystal structure γ-alumina refractory materials cement nanopowder

Abstract

The optimal synthesis temperatures and methods of using the alumina-containing waste in the process of obtaining calcium aluminate are determined. It has been established that the optimum synthesis temperature is 1100°C and corresponds to the maximum full formation of calcium aluminate with the smallest dispersion of particles, the size of 100-700 nm.

References

Dejene F.B., Bem D.B., Swart H.C. Synthesis and characterization of CaAlxOy:Eu2+ phosphors prepared using solution-combustion method // Journal of Rare Earths. 2010 – Vol. 28. – P. 272.

Rodr´ıguez M.A. Aguilar C.L. Solution combustion synthesis and sintering behavior of CaAl2O4 // Ceramics International. 2012. – Vol. 38. – P. 395–399.

Feng Ch., Yanruo H., JialinS..Preparation and characterization of calcium aluminate by chemical synthesis // Journal of University of Science and Technology Beijing. 2006. – Vol.13. – P.82 – 86.

Lukáš K., Jiří M., Jan K., František Š. XPS characterization of polymer–monocalcium aluminate interface // Cement and Concrete Research. 2014. – Vol. 66. – P. 110 – 114.

Ahmed A. A., Hamdy E. Synthesis and characterization of some calcium aluminate phases from Nano-size starting materials // Boletín de la Sociedad Española de cerámica y Vidrio. – 2020. – Vol.240. – P.9 – 15.

Dekkers R., Woensdregt C. F. Crystal structural control on surface topology and crystal morphology of normal spinel (MgAl2O4) // J. Cryst. Growth. – 2002. – Vol.236. – P.441 – 454.

Freeda M., Subash T.D. Photoluminescence investigations of Ytterbium doped Calcium Aluminate nanophosphor synthesized by sol-gel technique // Materials Today: Proceedings. – 2020. – Vol.24. – P.2149 – 2156.

Madhukumar K. Thermoluminescence dosimetry of rare earth doped calcium aluminate phosphors // Bull. Mater. Sci. 2006. – Vol. 29. – № 2. – P.119–122.

Xiaowu Hu., Limin Wu. Effects of co-activator species and transition metal ions doping on structure and fluorescence properties of strontium aluminate phosphors // Journal of Materials Science: Materials in Electronics. – 2019. – Vol.30. –Iss.4. – P.3804 – 3810.

Bodisˇová K., Klement R., Galusek D. Luminescent rare-earth-doped transparent alumina ceramics // Journal of the European Ceramic Society. 2016. – Vol.36. Iss.12. – P. 2975-2980.

EminovAl.A., Kadyrova Z.R., Iskandarova M. Gas processing waste perspective raw materials for designing the composition of ceramic grinding bodies // Glass and Ceramics. 2021. No.1. P. 43 – 48.