Due to the fact that hollow-core slabs without formwork are produced without slinging loops (features of manufacturing technology), the issue of installation and transportation of these slabs has been solved. A constructive and technological solution is proposed for a slinging unit, arranged in the body of the slab, without the use of a slinging loop, and having only an anchor rod-dowel through which it is possible to directly sling the slab without using traditional slinging loops. The unit is designed with a reduced metal consumption and does not change the technology for manufacturing hollow-core slabs without formwork. Found and summed up a theoretical basis for calculating the bearing capacity of the proposed slinging unit, arranged in a hollow-core slab without formwork. It was revealed that the bearing capacity of the proposed slinging assembly, arranged in the body of a hollow-core slab, under the action of assembly loads, depends on the force of splitting the concrete of the protective layer located above the anchor rod-dowel of this assembly (all other things being equal). The theoretical data of the study were verified by full-scale tests of plates with slinging units arranged in their body, carried out in accordance with the proposed constructive and technological development. A utility model patent was obtained for the development of a loopless slinging unit for a hollow-core slab without formwork.
Goncharova M. A., Ivashkin A. N., Kosta A. A. Selection and optimization of concrete compositions for the production of hollow-core slabs without formwork. Construction Materials. Moscow: No. 3 (2017). -pp. 35-38.
Barkov Yu. V., Zakharov VF Cross-shaped loops for reinforced concrete hollow-core floor slabs without formwork bench molding. Housing construction. Moscow: No. 10 (2008). -pp. 24-27.
Barkov Yu. V., Golofast SI, Zakharov VF Smirnov L. Yu. Multi-hollow building product and method of its production. Patent for invention RU 2 204 665 C1 (20.05.2003).
Anferov V.A. A hollow building product and a method for its manufacture. Invention patent RU 2.263 748 C1. (10.11.2005).
Degotkov O.V., Krivchikov A.N. Poly-hollow building product and method of its manufacture. Invention patent RU 2 313 639 C1 (27.12.2007).
Serbinovsky A.V., Pesotsky E.A., Pinevich S.S. Reinforced concrete hollow-core slab of stand-off formwork molding. Utility model patent RU 65 917 U1. (27.03.2007).
Shashin A.F., Kalinichev N.N., Minkin B.R., Closed assembly loops in heavy concrete products. Concrete and reinforced concrete. Moscow: No. 9 (1986). -pp. 5-6.
Grinev V.D., Popkov Yu.V., Gil A.I. Hollow reinforced concrete slabs with modified mounting loops. Bulletin of Polotsk State University. Applied Sciences. Series F. Construction. No. 16 (2011). -pp. 67-70.
Ashkinadze G.N., Sokolov M.E., Martynova L.D., Lishak V.I. (USSR), Tassnos F., Tsukantas S., Plainis P., Skarpas A. (Greece). Reinforced concrete walls of earthquake-resistant buildings: Research and design bases. Moscow: Stroyizdat. (1988). –p. 504. - ISBN 5-274-00212-5.
Rasmussen B. H. Strength of transyezsely loaded boltsand dowels cast info conerete. Laboratoriet for Bygningastatik, Denmark Technical University, Meddelelse. vol. 34. №2, 1962.
Utesher G. and Herrmann M. Vesushe zur Ermittlung der Tragfahig Keit in beton eingespannter Rundstahldollen aus nichetrostondem austenitischem Stahi. Deutscher Ausschuss fur stahlbeton, Heft 346, Berlin, 1983, p 49-104.
Gustafsson P. J. and Hillerborg A. Impovements in concrete design achieved trhough the application of feacture mechanics. NATO ARW: Fracture Mechanics in conrete. Northwestern University, September, 1984.
Мирзаев П. Т., Умаров К. С., Мирзаев Ш. П., Шухратходжаев Ж. М. Многопустотная плита безопалубочного формования. Патент на полезную модель UZFAP01501 (29.05.2020).