This study delves into the transformation of waste into a valuable resource by exploring the impact of adhesive paper waste weight percentage in biobriquettes derived from cassava skin waste. Through a systematic investigation, the research assesses the influence of varying proportions of adhesive paper waste on the physical and combustion characteristics of the biobriquettes. The results reveal insights into the feasibility of incorporating adhesive paper waste as a binding agent in cassava skin biobriquettes, providing a sustainable and economically viable approach to waste utilization.
Regulation of The Minister of Energy And Mineral Resources of The Republic of Indonesia. Indonesia, 2019.
T. Assistance, U. Ausaid, I. Market, and D. Indonesia, “Introducing Market Development Indonesia ( IMDI ) Sector Report Cassava in East Java , & NTT,” 2015.
CABI, “Datasheet Report forManihot esculenta (cassava).” [Online]. Available: https://www.cabi.org/isc/datasheet/32401. [Accessed: 11-Sep-2020].
Z. Helwani et al., “Alternative briquette material made from palm stem biomass mediated by glycerol crude of biodiesel byproducts as a natural adhesive,” Processes, vol. 8, no. 7, 2020.
M. Mahidin, A. Gani, and K. Khairil, “Physical Characterization and Desulfurization of Biobriquette Using Calcium-Based Adsorbent,” Makara J. Technol., vol. 15, no. 2, p. 178, 2013.
V. D. Pratiwi, “Effect of Burning Temperature on The Quality of Alternatife Bio-energy from Coffee Waste,” ELKOMIKA J. Tek. Energi Elektr. Tek. Telekomun. Tek. Elektron., vol. 8, no. 3, p. 615, 2020.
C. R. Lohri, H. M. Rajabu, D. J. Sweeney, and C. Zurbrügg, “Char fuel production in developing countries -A review of urban biowaste carbonization,” Renew. Sustain. Energy Rev., vol. 59, pp. 1514–1530, 2016.
O. A. Oyelaran, F. M. Sani, O. M. Sanusi, O. Balogun, and A. O. Fagbemigun, “Energy Potentials of Briquette Produced from Tannery Solid Waste,” Makara J. Technol., vol. 21, no. 3, p. 122, 2018.
L. Ifa et al., “Production of bio-briquette from biochar derived from pyrolysis of cashew nut waste,” Ecol. Environ. Conserv., vol. 25, no. September Suppl. Issue, pp. S125–S131, 2019.
Sunardi, Djuanda, and M. A. S. Mandra, “Characteristics of charcoal briquettes from agricultural waste with compaction pressure and particle size variation as alternative fuel,” Int. Energy J., vol. 19, no. 3, pp. 139–147, 2019.
C. Thassana and W. Nuleg, “Effect of carbon black on thermal properties of charcoal and salacca leafstalk briquettes,” AIP Conf. Proc., vol. 1868, 2017.
H. A. Ajimotokan, A. O. Ehindero, K. S. Ajao, A. A. Adeleke, P. P. Ikubanni, and Y. L. Shuaib-Babata, “Combustion characteristics of fuel briquettes made from charcoal particles and sawdust agglomerates,” Sci. African, vol. 6, 2019.
A.Demirbaş and A. H. Demirbaş, “Estimating the calorific values of lignocellulosic fuels,” Energy Explor. Exploit., vol. 22, no. 2, pp. 135–143, 2004