Topicality and demand of the theme of dissertation. In world practice of informatization, systems of electronic document interchange (EDIS) arc considered and introduced last years not only as systems for automation of manage processes but also as high-grade platforms for creation of uniform information field, so borders of their use, certainly, expands and scientists of the world raises interest to them. In researches of leading scientists of infocommunication technologies the demand of problems of authentic gathering, transfer, analysis, coding of information during formation of office-work documents is allocated for getting of effective technologies raising mobility and productivity of EDIS.
Complex measures undertaken by the Government of Republic of Uzbekistan on development of systems of region-territorial automated management and to creation of uniform information field arc directed on wide introduction of information systems, EDIS, databases (DB) on the basis of modern information-communication technologies. In this connection, working out of new methods to intelligent processing of information resources used for improvement of data transfer quality, allowing effectively to find out and correct errors in structure of electronic document interchange with least material and time expenses, differs a special urgency and, at the same time, remains the unresolved theoretical and applied problem having important economic value.
Requirements to information resources and streams of data transmission as the important factor of efficiency and quality of EDIS functioning arc expressed in providing of stability, integrity, safety and authenticity of the information. One of important among factors is the criterion of authenticity of the information, caused by distortion of transferred messages in infocommunication networks because of failures and refusals of means, any handicaps in communication channels, errors of operators, scanning and recognition systems.
Hence, construction of effective systems to control of information authenticity during transfer and processing represents special scientific interest as priority technology of data processing, characteristic for conditions of automated management and electronic document interchange at the enterprises and organizations.
For existing methods, despite of providing the high level of information transfer authenticity, some unsolved questions is typical, and as basic of them it is possible to allocate the following: at development technologies of electronic documents interchange in structure of modern data transfer packages the significant volume of resource is spent for headings, at the same time the most part of information in headings remains constant from package to package during stream of transfer of the whole frame (redundancy of the information arising at it and mechanisms to provide reliability of deliveries consisting, basically, in sending the appropriate message and repeated transfer of packages, - result to additional time and material expenses while errors detection and elimination); code and hardware methods of information transfer control arc focused, mainly, on elimination the transposition mistakes in managing fields of packages; however, at data transfer there arc also distortions in information fields, which frequently reveal as multiple text mistakes.
In this relation, the decision of tasks for providing of information transfer authenticity is reasonable to consider in two aspects.
Solutions of the first type tasks should taken into account errors of the man-operator, scanning and other devices intended for input of the information. These kinds of mistakes make greatest volume of distortions in text and arise at Applied and Representation levels of OSI model (Open System Interconnection reference model).
Solutions of second type tasks, devoted to control of the information reliability, take into consideration the probability of distortions which occur at stages of Transport, Network, Physical and Line of model OSI.
Demand of the dissertation is characterized by the fact that introduction of a wide range of IP-enabled technologies in electronic document interchange is connected to requiring close attention tasks of detection and correction of errors during preparation and processing of documents.
This research work is focused on providing realization of laws of the Republic of Uzbekistan «On informatization», «On electronic digital signature», «On electronic document», «On electronic commerce», «On electronic payments», Decree of the Cabinet of Ministers of the Republic of Uzbekistan № 126 on 05.04.2011 «About measures on installation and use of a single secured e-mail and system of electronic document interchange in the executive office of cabinet of ministers, bodies of government and economic governance, local government».
Following that, the solution of listed tasks requires carrying out the special researches and development connected to creation of methods and algorithms, capable to control the information authenticity in structure of data transfer packages at the expense of use the enclosed redundancy, and able to function in transport environment, eliminating existing lacks. This fact causes necessity of allocation of a special class algorithms for providing of information authenticity on the basis of new type of PR-rcdundancy (property redundancy), defined by depending on properties of processed object.
Purpose of research is development ol constructive methods, models, algorithms and systems of information authenticity control during transfer and processing of the data on the basis of mechanisms used PR-rcdundancy of various nature, and software and algorithmic realization of results for developing technologies of electronic document interchange.
Scientific novelty of disscrtational research consists in the following:
concept, methodology and software and algorithmic bases to construction methods, models and algorithms for the information authenticity control in systems of electronic document interchange arc developed, classes of objects characterized by PR-rcdundancy, applied to provide accuracy, integrity, efficiency, compression, availability of information resources in EDIS arc allocated;
methods and algorithms arc offered for control of information reliability at the expense of use the artificial redundancy on the basis of linear, modular, plane summing mechanisms and definition of belonging to the coded subsets;
methods and software complexes arc developed for control of information reliability at the expense of use the natural redundancy on the basis of algorithms in which procedures of statistical, arithmetic, parsing coding, n-gram structured description, statistical pattern recognition and hashing of text elements arc realized;
for control and correction of spelling mistakes in texts on Uzbek language methods and algorithms arc offered on the basis of models of multilevel morphological analysis and n-grams Grammatik description;
on the basis of enclosed logic criteria, database and knowledgebase in structure of the built-in expert systems methods and algorithms arc developed for the control of information authenticity at the expense of use the structural-technological PR-rcdundancy;
methods arc offered to synthesis algorithms of text information reliability control in interactive system of errors detection and correction for developing technologies of electronic document interchange.
Conclusion
1. Developed in the dissertation constructive methods, models, software and algorithms complexes to control of information authenticity by principles of using of PR-rcdundancy on the basis of concepts of system analysis, control and information processing allow to increase efficiency and productivity of EDIS.
2. The estimation of current state of the theory and practice of code, hardware and program methods of control of authenticity information transfer had shown insufficiency of existing types of redundancy for providing qualitative functioning of EDIS. Principles of use of PR-rcdundancy at electronic documents for working out applied methods, software and algorithmic complexes to providing of information transfer authenticity have allowed to design toolkit of development of existing technologies.
3. Methods of: linear, plane and modular summation; codings by rules of Haffman, Lempcl-Ziv-Velch, Barrousc-Willcr, arithmetic coding, statistical recognition, logic control form methodical bases of use of PR-rcdundancy for expansion possibilities of algorithms and software complexes to providing of the information authenticity during drawing up, transfer and processing of electronic documents texts.
4. Efficiency of developed algorithms is shown and solutions arc got for tasks of control the information authenticity on the basis of criterion of mistakes undctccting probabilities. It is established, that they find up to 92 % of all kinds of mistakes, capable to correct single, double and adjacent transpositional mistakes, in comparison with existing methods reduce labour content and cost of control in 2-3 times if probability of mistakes is accepted as P«4-10-3, and also raise the information authenticity up to three orders.
5. To solving tasks of control and correction of spelling mistakes in Uzbek texts methods, algorithms and systems arc developed included morphological and n-gram structured models. The developed technique of getting frequency characteristics of n-gram on the basis of distortions probability parameters statistics arc applied during systematization hash-codes for parsing coding.
6. Interpolation and extrapolation methods of construction the logic and arithmetic function of statistical recognition arc used for working out algorithms to control of text elements images authenticity. Methods arc developed to control authenticity of alarm characteristics of text elements images in ncuronctworking system to information processing which includes parts of automatic recognition and control of images signals. Methods and algorithms arc realized in the structure system to control of information authenticity for eases when information in EDIS is represented as metatext on the basis of belonging attributes and classification of metatext on fuzzy semantic hypcrnct.
7. Methods and algorithms of the control of the information authenticity, based on methods of dictionary, statistical and hash-codings provide effective applying of the hardware-software environment of parallel computations NVIDIA with use of standard libraries of numerical analysis, optimized data exchange between CPU and GPU for optimization.
8. It is determined that at realization of the system to control of spelling on the basis of developed ways of description and identification of the software shell, treelike representation of n-gramm grammar and architecture of framework Sfinks-4 focused on various language models used PR-rcdundancy, the number of undetected errors and cost of realization considerably decreases, and labour content in comparison with the spelling control system on the basis of morphological analysis decreases twice.
9. Developed simulating algorithms, complexes of software and systems to control of information authenticity on the basis of using PR-rcdundancy have found practical application in systems of: automated organization of educational environment in high schools; adapted data transfer, processing and analysis in infocommunication networks; EDIS of enterprises.
10. The developed software complexes to control the information authenticity in structure of EDIS and computer system of adapted transfer, handling and data analysis arc implemented in real working conditions in the Samarkand branch «UzTelecom» of the State committee or communication, for informatization and telecommunication technologies of the Republic of Uzbekistan and in Joint Venture «Tasty-Fuit». Appropriate certificates confirm cost of economical efficiency of dissertation results.
Topicality and demand of the subject of dissertation. Development of science and intensification of all branches of national economy and also introduction of new technogenic processes of production have resulted in antropogenic influence of industrial activity of man on the environment and ecological equilibrium According to the data of regional evaluation of stable toxical compounds in the countries of the European Counsel the highest concentrations of Pb, Cd and Hg in the environment have been noted in the Ukraine (Pb-31,02; Cd-54, Hg-36 ton/year).Release of heavy metals to the environment for Russia equaled Pb-50%; Cd-66%; Hg-37% and in some others countries: Pb-10%,Cd-21%,Hg-58%,.Short analysis of the situation interms of these tree toxical metals has shown the level of antropogenic throwings of heavy toxical metals(HTM).The biggest part of HTM finding with throwings released to the atmosphere thrown out on soil and in waters of the country being the-surce the release and then they accumulate in neighbouring countries .
At presente time in the Republic of Uzbekistan the level of manufacture is rapidly growing and this results in the increase of the concervation of HTM compared with global scale of some natural processes. The most dangerous for the health of population are the non-essencial elements (Hg, Cd, Pb, As) . For this reason the monitoring of pollutions of objects of environment especialy HTM has acquired special importance and actuality. Qualitative and quantitative determination of ions of HTM has acquired important and necessary demands and has pulled out before analysts and ecologists the task of elaboration of express sensitive and selective methods of determination of microquantities of these elements which are dangerous toxicants, cancerogens and mutagens.
In this regard in the process protection of objects of the environment it is important and necessary to determinetion precise concentrations of HTM by different physical, chemical and physico-chemicals methods. For the practical realization of this problem at chemical analysis it is necessary to improve perfection existing methods analysis and elaborationof new modern methods ecotoxicants monitoring (espessially HTM). In the aspect of realization of theoretical prerequisites and practical confirmation of analytical determination of ecotoxicants concentrations it is necessary to elaborate some new hybrid methods with immobilization of different complexe-forming reagents on polymeric bearers and matrixes differing by high meteological and operation parameters.
Existing actual problems can be solved by introducing to the analytical practices of the methods of HTM determination of some new selective and specific organic reagents.The most perspective way of their solution is the purposeful synthesis and immobilization of new organic reagents with some definite analytical characteristics with following forecast of their properties with the aim of the optimal solving of the given tasks.
Elaboration of methods and approaches of prognosis as method of further development of sorbtion-spectroscopical method of analysis is an actual problem .In this range of theoretical and applied analytical chemistry there are considerable achivments bonding with investigations of home and forcing investigators ,but row of questions of problematical character has demanded of deep investigation and knowledges of new approaches and methods of their decision.
It is known that theory of action of OR is characterized as “system of ideas” allow ing to construct of some analytical system to find optimal by nature reagent and medium in which analytical reaction will carried out .In decision of some taskes of development of theory of OR action the fallowing stages neussarg to take into acconnl:”esplantion of observe processes and phenoments:prediction and direction works by synthesis of reagents with given properties .’’Thus the elaborated methodology and predication of properties of immobilized analytical reagents can be consider as definite seintific contribution in development of theory of action of IMOR for their using in analytical chemistry and ecology.
Purpose of research is elaboration of express, high-sensitive sorbtion-spectroscopical methods and test-systems of HTM determination with using of IMOR. Elaboration on the base of these methods some general approach to prognosis of properties and construction of specifical analytical grouos in organic reagents immobilized on different types of bearers synthesis of new organic reagents with given up properties on the base of our theretical prognosisesand introduction of them in practice of analysis of different analytical and ecological laboratories.
To achieve this goal the following tasks of research is solved: -optimization of immobilization conditions of organic reagents with preservation of their analytical properties; determination of mechanism of coloured reactious of complex-formation of immobilized organic reagents with ions of HTM;
-determination of connection between structure of OR and their analytical characteristics; prognosis of some perspective ways of their modification and directed synthesis of new specifical reagents on the base of nitronaphtols;
-analytical groups (EAG): (6-methyl-pyridil-2-azo-aminophenol; l-(5-methyl -2-pyridilfzo )-5-diethglaminophenol ;l-(4-antipyridilazo) -2-napthol sulphoacid; 1-(2-pyridilazo)-2-oxynaphtalin-6-sulphoacid sodlium; 3-hydroxy-4-nitrozo-2-naphtoic acid;2-hydroxiy -3-nitrozo naphtaldehyde and others);
-determination of influence of different factors and parameters on value of the analytical signal ;wing of elaborated methods in analysis of different by nature model binary ,triple and more complex mixtabiological objects industrial materials
-comparison of obtained results with results obtained by existing methods of determination of the investisated metals in solution.
Scientific novelty of disscrtational research consists in the following:
-Immobilization of different by nature reagents for prognosis and prediction of optimal construction of some OR based on quantum-chemical value of changing of analytical characteristics in dependence on structure of the functional and analytical-active groups has been theoretically based and practically has been realized;
-Chemico-analytical properties of OR immobilized on bearers on the base of polyacrylonitrile (PAN) and polypropylene (PP) for apriory prediction of structure of different OR and elaboration on their base an optical chemical sensors on the base PAN and PP-matrixes having some necessary analytical parameters;
Conclusion
1. Litrature date about using fiber sorbents and ion-exchanging on their base for determination of HTM cations at analysis objects of environment have been summarized. Advantages of using of fiber sorbents in comparison with their using as granule and powder have been shown. Necessarily of search of new immobilized reagents for determination metals in different objects was ground.
2. New scientific trend in analytical chemistry based on the sorbtion-spectroscopical determination of HTM in different objects of enviroment with using immobilized on fiber material organical reagents of different nature with aim of improvment of metrological parameters, exploitational and analytical parameters was developed.
3. Pysico-chemical and analytical properties of immobilized reagents on the base of reagents Arsenaza and threephenylmethan row and also synthesized on the department of organical chemistry NUUz sorbited on the fiber “Nitron” were systematically investigated. Optimal conditions of immobilization of new reagents on some polymeric bearers with preservation of theirspecifical analytical properties were determined.
4. 1R- spectroskopical investigation of immobilized reagents of fiber sorbents and their complexes with cations of HTM was carriedout. It was proved that in complex-formation of HTM ions with immobilized reagents the same functional analytical groups participated as in case of native solutions.
5. Results of investigations of interaction of reagents group Arsenazo and theephenylmethanic raw and also reagents synthesized on the derailment of inorganical and analytical chemistry of chemical faculty ofNUUz immobilized on marix on the base of PAN and PP-fibers with ions of HTM have shown that their immobilization was carried out owing to ionic changing and also formation of strong intermolecular hydrogenous bonds with bearers.
6. Using of calculating quant- chemical methods such as EMN, MNDO, RMZ and AM-1 has allowed in apriori to predict the structures of different rengents having some necessary analytical parameters (sensibility, contrastion of reactions and conditions of their carring out).
7. On the base on comparison optimal conditions of immobilization, sorbtion, degree of extraction of metals ions, coefficients of distribution, sorbtion capasity of fiber sorbents, data about sensibility of the analytical action occording to ions Cd, Hg, Cu and Fe in presence of accompanying elements, possibilities of quantitative desorption by small volumes of mineral acids and accessibility of initialcompounds it is shown an perspective of practical using of synthesized reagents and fiber sorbents. Immobilized reagents quantitativly have extracted ions of metals during 20-30 min at temperature 20-25°C in pH diapazone 3-7 (R=90-99%).
8. Coplex of methods of solidphase - spectroshopical and visually-testing determination of HTM in natural objects and samples of sewage and also new effective method of sorbtion - spectroskopical determination of Co,Cu, Cu, Ni, Fe and Hg in drinking and natural waters with using of immobilized organical reagent has been elaborated . This sorbtion - spectroskopical method has allowed to determine abovementioned metals in drinking and natural waters on the level n x 10-6 - n x 10'3 % and also to decrease the limitof their determination . Rightness of elaborated methods was proved by method “introduced - determined” at analysis of some real abjects and also by comparison with data obtained by atom -absorbtion method.
9. Elaborated methods were aprobated at analysis of real objects and were introduced in practics of laboratories by investigation of surface waters NYSMY; SES (sanepidemic station) of Tashkent region and Bekabad; department of radiopreparates of INP (Institute of nucleur physies) and others. Some obtained experimental data have been introduced in educational process at reading of lectures , carring out seminars and labaratory works with bachelors and masters by courses : “Analysis of environment objects”; “Optical methods of analysis “ ; “Physical methods of analysis “ ; “ Metrology statistics and computer in analytical chemistry” on the departments ofNUUz ; SamSU; Term.SV Tash.Pharm.1.
The purpose of this paper is to analyze the main factors in obtaining a target result in the teaching of the topic in the classroom using interactive methods, to consider the positive features of Blum's taxonomy in the use of interactive methods, as well as the process of applying interactive methods in the correct interpretation of the line. Using interactive methods, the task of the research is to divide the scope of positive influence in the class into groups, to interpret each of them individually, and to consider the scope of influence by linking them to the teaching of military terms to students studying in the military. Another task is to highlight the teacher’s roles with separate comments in order to explain what kind of characters and skills the teacher should have in the process of using interactive methods.
In modern abdominal surgery, one of the current areas for research continues to be the improvement of various options for plastic surgery of postoperative hernias. More than 2,100,000 operations for ventral hernia are performed annually in the world, and 42% of them are postoperative hernias. In recent years, there has been a clear trend toward the expanded use of various types of biological meshes in hernioplasty. “A pooled analysis of seven PCSTAR studies for incisional hernias using retromuscular mesh showed a hernia recurrence rate of 5.7%”[1]. The use of standard surgical interventions such as alloplasty in the onlay position does not solve the problem of early postoperative complications: seroma discharge, mesh migration, adhesive disease, high frequency of hernia recurrence, etc. At the same time, hernia repair with local tissue creates the problem of increased intra-abdominal pressure and late complications in the form of recurrent hernias. “An increase in postoperative intra-abdominal pressure leads to multiple organ failure, then abdominal compartment syndrome, and even death.” [2]. Currently, there is no consensus on the surgical approach for giant postoperative abdominal wall hernias, and therefore the need to continue to develop new technologies and improve There is no doubt about the tactics. In world practice, at present, the most relevant studies continue to be studies aimed at studying the morphological and functional aspects of recurrent postoperative ventral hernias; electron microscopy reveals ultrastructural destructive changes in skin cells, aponeurosis and muscles, which indicates morphofunctional insufficiency of abdominal wall tissues; issues of cell engineering are discussed new innovative materials, experimental studies are being carried out on animals testing the biotechnical properties, texture and elasticity of new polymers, research is being conducted on open approaches with division of the posterior component with the release of the transverse abdominis muscle and a retrograde mesh, robotic operations have begun. Modern aspects of the development of domestic healthcare include many measures aimed at improving the results of treatment of patients with postoperative ventral hernias and associated pathological conditions through the introduction of modern principles of intensive care and surgical tactics. The development strategy of New Uzbekistan for 2022-2026 in seven priority areas includes tasks to improve the quality of provision of qualified medical services to the population[3]. The implementation of these tasks, including by optimizing tactical and technical approaches to the choice of hernioplasty method, as well as the development of methods for the prevention of purulent-inflammatory complications in the field of alloplastic material, is one of the current areas of abdominal surgery and medicine in general, due to the high medical and social the significance of this pathology.
This dissertation research to a certain extent serves to fulfill the tasks approved by the Decree of the President of the Republic of Uzbekistan “On comprehensive measures to radically improve the healthcare system of the Republic of Uzbekistan” No. UP-5590 dated December 17, 2018, the Resolutions of the President of the Republic of Uzbekistan “On measures to transform the surgical service, improving the quality and expanding the scale of surgical operations in the regions" for No. PP-5254 dated October 4, 2021 and "On additional measures to ensure public health by further increasing the efficiency of medical prevention work" for No. PP-4891 dated November 12, 2020, and as well as other regulatory documents adopted in this area. Compliance of the research with the priority directions of development of science and technology of the republic. The dissertation research was carried out in accordance with the priority direction of development of science and technology of the VI Republic “Medicine and Pharmacology”. Review of foreign scientific research on the topic of the dissertation.[4] Research work aimed at improving the quality of therapeutic and preventive care for patients with ventral hernias, carried out by many leading scientific centers and higher educational institutions in the world, including the Department of Surgical and Perioperative Sciences, Umeå University, Umeå (Sweden), Department of Surgery, Kingston General Hospital, 76 Stuart Street, Kingston (Sweden). nada), Department of Surgery, Helsinki University Hospital, Helsinki ( Finland), Service de chirurgie digestive et oncologique, CHU d'Amiens (France), Department of Biostatistics and Epidemiology, University of Oklahoma Health Sciences Center, Tulsa (USA), Department of Surgery, Howard University College of Medicine, Washington (USA) , Yong Loo Lin School of Medicine, National University of Singapore (Singapore), Department of Surgery, Michigan Medicine, Ann Arbor, MI, USA; University of Calgary, Calgary (Canada), Division of Plastic Surgery, Perelman School of Medicine at the University of Pennsylvania, University of Pennsylvania Health System, Philadelphia (USA), Brigham and Women's/Faulkner Hospital, Harvard Medical School, Boston (USA) , Department of Surgical Sciences, Uppsala University Hospital, Uppsala (Sweden), Department of Surgery, University of Texas Health Sciences Center at Houston, Houston (USA), Department of Surgery, Erasmus University Medical Center Rotterdam, Rotterdam (Netherlands), Department of Preventive Medicine and Public Health, Faculty of Medicine, Fukuoka University, Fukuoka (Japan), National Medical Research Center for Surgery named after A.V. Vishnevsky" (Russia), Republican Scientific Center for Emergency Medical Care (Uzbekistan), Tashkent Medical Academy (Uzbekistan), Republican Specialized Scientific and Practical Medical Center for Surgery named after Academician V. Vakhidov (Uzbekistan).
As a result of studies conducted around the world to increase the effectiveness of alloplasty for postoperative ventral hernias and reduce the risk of complications in the postoperative period, a number of scientific results were obtained, including: it was determined that patients who underwent reconstruction of the abdominal wall have an increased risk of postoperative respiratory failure, understanding the epidemiology of this complication can improve prevention (the Division of Plastic and Reconstructive Surgery, Department of Surgery, Oregon Health & Science University, USA); It has been proven that the larger the hernia, the higher the risk of early surgical complications, including such as respiratory decompensation, since hernias often increase in size over time, delaying surgery can lead to an increase in the size of the hernia and, therefore, a greater risk of complications (CentreforDigestiveDiseases, KarolinskaUniversityHospital, Stockholm, Sweden); it has been shown that the ratio of the hernia volume to the volume of the abdominal cavity <20% is an independent factor in tension-free closure, which justifies the interest in preoperative volumetry to adapt the tactics of surgical care (Servicedechirurgiegénérale, digestiveetendocrinienne, CHU LyonSud, HospicescivilsdeLyon, France); It has been determined that in patients undergoing elective laparoscopic hernia repair, predictors of mortality are older age and certain concomitant diseases: congestive heart failure, pulmonary circulatory disorders, coagulopathy, liver disease, metastatic cancer, neurological disorders and paralysis (Department of Surgery, College of Medicine, University of Oklahoma, Tulsa , USA); Older age, ascites, preoperative renal and pulmonary insufficiency have been found to be independent predictors of 30-day mortality, and in the presence of these risk factors, conservative treatment should be seriously considered (Department of Surgery, University of Kentucky College of Medicine, Lexington, USA); The American College of Surgeons (ACS) Universal Surgical Risk Calculator has been shown to accurately predict thirty-day outcomes, including major complications: venous thromboembolism, medical morbidity, surgical site infection, unplanned reoperation, mortality, and length of hospital stay (Department of Plastic Surgery, Brown University and Rhode Island Hospital, Providence, USA). At the present time in the world, the most relevant research in surgery continues to be the development of new methods of hernioplasty for large and giant ventral hernias, each of which has its own pros and cons depending on the complexity of implementation, the risk of postoperative complications and relapse, large randomized clinical trials are being conducted, comparing existing methods of traditional hernioplasty with laparoscopic access and robotic surgery, which has become increasingly widespread in the last 10 years, a search is being made for new synthetic and biological materials developed for the production and use of composite meshes that have the necessary strength and the ability to prevent fatal local complications in a contaminated environment. However, despite technical advances in this field, no modern hernia repair method or prosthesis meets all the requirements. One of the key problems is that existing synthetic endoprostheses do not have sufficient elasticity, resistance to infection, high mechanical strength and integrity over a long period of time. Further research into these clinical aspects will undoubtedly improve the current understanding of the capabilities of biocompatible endoprostheses and will make it possible to develop an optimal method for their placement during allohernioplasty. The degree of knowledge of the problem. The current period of development of abdominal surgery is characterized by an emphasis on the problems of the effectiveness of introducing new installation methods and techniques for attaching bioprostheses, options for various suture materials to determine the most promising directions for the development of these technologies [5]. Researchers led by BittnerR.[6] (2019) state that a giant postoperative abdominal wall hernia, the maximum diameter of which exceeds 12 cm or the ratio of the volume of the hernial sac to the abdominal cavity more than 20%, is difficult to treat, with a high recurrence rate and a large number of complications. One of the most challenging problems is that after the hernia contents return to the abdominal cavity, postoperative intra-abdominal pressure will increase, leading to multiple organ failure, then abdominal compartment syndrome (ACS), and even death. There is currently no agreement on the surgical approach for these giant incisional abdominal wall hernias. To prevent recurrences, some articles recommend placing the hernia mesh in the sublayer position and or linings (KirkpatrickAW.)[7]. According to CornetteB.[8], to prevent recurrence, it is recommended to place the hernia mesh in a sublayer or underlay position, and to achieve better mesh expansion, a component separation technique (CST) may be a suitable solution, but with a significant risk of complications and recurrence. JensenKK, et al. believe that truly successful giant hernia repair requires effective bridging or augmentation that will prevent recurrence with an acceptable risk of complications[9]. Another pressing issue in abdominal surgery is that patients with incisional hernias are extremely difficult to treat due to a number of factors including obesity, previous hernia repair, previous mesh placement, domain loss, and other variables.
The approach to patients with incisional hernias has changed significantly over the past 20 years due to both advances in mesh technology and surgical approaches. Key factors for successful outcome include modification of risk factors preoperatively, such as smoking cessation and weight loss, selection of mesh appropriate for the type of hernia and planned mesh location, and wide mesh coverage beyond the hernia defect. New techniques such as transabdominal muscle release and component separation with retrograde mesh placement and robotic approaches to abdominal wall hernia are increasingly being used in these patients[10]. Recent years have seen an increase in the number of biological meshes available for abdominal wall hernia repair. Biological meshes typically consist of materials obtained from humans, pigs, or cattle. The rationale for using biological meshes is that they can act as a scaffold for the growth of natural tissues. In addition, there are absorbable synthetic meshes that have properties similar to those of biological meshes, but with theoretically less risk because they are not derived from animal or human material. The choice of mesh for a ventral hernia depends on many factors, which include both the properties of the mesh and its location, for example, whether it should be placed intraperitoneally, preperitoneally, or retrorectus. BaierKF[11](2021) believes that the guiding principle should be to avoid placing uncoated polypropylene mesh in an intraperitoneal location where it may be in direct contact with internal organs. In addition, the type of hernia defect is another risk factor, such as whether the wound is clean or dirty, and whether the repair is performed with a bridge or abutment. Lightweight or biologic meshes to bridge the defect should be avoided due to increased recurrence rates. Holihan JL [12] (2016), Hodgkinson JD [13] (2018) believe that the principle of anatomical restoration to achieve a reliable, tension-free repair with reinforced mesh reduces the incidence of early postoperative complications and late recurrence of hernia compared with bridging mesh. The analysis of the literature concerning the theoretical aspects and clinical experience of using technologies for improving modern synthetic and biological prostheses that can provide a better plastic effect, as well as methods for preventing recurrence of ventral hernias, indicates that this is one of the priority areas in modern abdominal surgery. An unresolved issue remains the choice of the optimal endoprosthesis, which is highly effective and meets international standards for such properties as biological inertness and mechanical strength, as well as the method of positioning the mesh in relation to the layers of the abdominal wall. Considering that many of the allohernioplasty methods used today are not without drawbacks, the current direction is the development of new methods of repair for giant ventral hernias and methods for the prevention of postoperative complications in conditions of a contaminated wound, with justification of their effectiveness in a clinical experimental study. The connection between the dissertation research and the research plans of the research institution where the dissertation was completed. The dissertation research was carried out within the framework of the research work plan of the State Institution “RSNPMCH named after. acad. V. Vakhidov" under the project AL-422105574 "Development of new biocompatible mesh implants made of composite materials for reconstructive surgery of abdominal and diaphragmatic hernias" (2022-2024).
The purpose of the study is to improve the results of surgical treatment of large and giant postoperative ventral hernias by introducing new laser technologies and improving the tactical and technical aspects of surgical treatment. Objectives of the study: to study the structure of immediate complications after various types of prosthetic plastic surgery; to clarify the influence of obesity factors, primary or repeat hernioplasty on the incidence of immediate and long-term complications; to evaluate the role of the immediate complicated course of the postoperative period in the incidence of long-term complications of hernioplasty; to improve the technical aspects of alloplasty for large and giant postoperative ventral hernias (POVH); to improve the technique of photodynamic therapy (PDT) of the wound surface after prosthetic plastic surgery; to study in an experiment the effectiveness of using the proposed technique of alloplasty and PDT; evaluate the morphological features of the condition of tissues during prosthetic plastic surgery using the proposed method; in a comparative aspect, evaluate the clinical effectiveness of the proposed alloplasty options in the immediate and long-term periods. The object of the study was the results of allohernioplasty in 448 patients with extensive (large) and giant POVH, who were operated on at the surgical department of the 1st clinic of the Samarkand State Medical Institute in the period from 2012 to 2021, as well as experimental animals on which the effectiveness was assessed developed a technique for prosthetic repair of postoperative ventral hernias and applied the technique of photodynamic therapy.
The subject of the study is to analyze the effectiveness of the developed alloplasty of postoperative ventral hernias and intraoperative photodynamic therapy in abdominal surgery in experiments and in the clinic. Research methods. To achieve the goal of the study and solve the assigned problems, general clinical, instrumental, biotechnological, experimental, histomorphological, microbiological and statistical research methods were used. The scientific novelty of the study is as follows: it was established that the need for extensive tissue mobilization and, as a consequence, the intersection of lymphatic capillaries during implantation of the prosthesis in the onlay position, as well as the lack of sufficient resorption function of the hernial sac in the inlay position causes a high risk of the formation of clinically significant seromas; It was determined that with prosthetic hernioplasty, along with the volume of the defect, the type of plastic surgery and the degree of obesity, the most significant predictor of the risk of developing immediate complications is the factor of re-intervention in case of recurrent hernia with the presence of a “dormant infection” hidden in the remaining ligature granulomas or scar tissue; the structure and clinical features of the course of long-term complications of hernioplasty for giant and extensive hernias were clarified, taking into account the results of the immediate postoperative period, as well as the option of fixing the prosthesis, primary or repeated hernioplasty and the degree of obesity; the method of surgery for large hernias of the anterior abdominal wall has been improved, characterized by a combination of factors such as the formation of tension-free prosthetic repair, preservation of local resorptive function to prevent the development of fluid accumulations and reducing the risk of infection; the method of preventing the development or progression of wound infection during alloplasty of ventral hernias has been improved, aimed at enhancing the antibacterial effect and stimulating reparative activity through the photosensitizing and photodynamic effect of low-energy laser radiation; It was determined in an experimental model of prosthetic plastic surgery that the proposed method of fixing the prosthesis in combination with the use of the effect of photodynamic therapy through laser radiation helps to enhance reparative processes with a reduced risk of wound complications; It has been proven that all methods of antiseptic exposure and laser stimulation of the wound surface after prosthetic plastic surgery enhance preventive measures against the development of local infection, but are ineffective in the case of an already developed purulent-inflammatory process against the background of the use of alloplastic material. The practical results of the study are as follows: it has been determined that the implantation of synthetic materials for giant and extensive hernias is accompanied by a significant number of wound complications caused by both the surgical technique itself and the reaction of surrounding tissues to a foreign body, requiring improvement of tactical and technical approaches when performing hernioplasty; it was clarified that scar-degenerative changes in the tissues of the aponeurosis in giant and extensive hernias are a predisposing factor to the occurrence of post-prosthetic hernias, especially when implanting the prosthesis in the “inlay” position and, accordingly, require increasing the efficiency of their fixation and engraftment, as well as reducing the risk of developing local complications; it was determined based on the data of an experimental study that the proposed method of alloplasty for large ventral hernias makes it possible to achieve adequate reconstruction of the anterior abdominal wall, reduce the incidence of infection in the wound, and also use a smaller size of prosthetic material; it was determined that the proposed method of tension-free repair of large hernias of the anterior abdominal wall with strengthening of the aponeurosis with a mesh implant allows maintaining physiology, reducing the number of complications, shortening treatment time and reducing the risk of hernia recurrence; It has been determined that the proposed method for preventing the development or progression of wound infection during alloplasty of ventral hernias can reduce the frequency of suppuration, shorten the treatment time and the likelihood of relapse; It has been proven that the use of the proposed tactical and technical aspects of prosthetic repair for postoperative ventral hernias can reduce the incidence of specific complications, reduce rehabilitation time and the risk of hernia recurrence. Reliability of the research results. The reliability of the results is justified by the use of objective criteria for assessing the condition of patients, modern methods of diagnosis and treatment, the correct application of methodological approaches and sets of statistical analysis, methods for solving the problems discussed in the dissertation are based on modern scientific and practical concepts and approaches to the diagnosis and surgical treatment of patients with giant postoperative hernias. Scientific and practical significance of the research results. The results obtained make a significant contribution to the expansion of irradiation of existing ideas about the structure and clinical features of complications of hernioplasty for giant and extensive ventral hernias by identifying the morphological features of the development of a purulent-inflammatory process against the background of the use of alloplastic material, studying predictors of the risk of developing immediate complications, mechanisms for enhancing reparative processes through the use of an improved method of fixing the prosthesis in together using the effect of photodynamic therapy through laser radiation, which made it possible to enhance the antibacterial effect and improve the wound healing process. The practical significance of the study is that, based on the results obtained, the tactical and technical aspects of prosthetic hernioplasty have been optimized, the features of methods of antiseptic exposure and laser stimulation of the wound surface after prosthetic repair have been revealed, enhancing preventive measures for the development of local infection, and the method of surgery for large anterior abdominal hernias has been improved walls, characterized by a combination of factors such as the formation of tension-free prosthetic plasty, preservation of local resorptive function to prevent the development of fluid accumulations, thereby reducing the risk of developing postoperative complications, reducing the frequency of unsatisfactory results, length of hospitalization and the likelihood of relapse. Implementation of research results. According to the results of a scientific study to optimize the tactical and technical aspects of surgical treatment of large and giant postoperative ventral hernias: the “method for plastic surgery of giant hernias of the anterior abdominal wall” has been improved (invention patent No. IAP 2022 0148 dated April 18, 2022). The proposed method of tension-free repair of large hernias of the anterior abdominal wall with strengthening of the aponeurosis with a mesh implant made it possible to reduce the number of complications, shorten the treatment time and reduce the risk of hernia recurrence; the “method for preventing the progression of infection during alloplasty of infected hernias” has been improved (certificate of the Ministry of Health No. 08-32071 dated October 17, 2022). The proposed method made it possible to reduce the frequency of wound purulent-inflammatory complications and shorten the period of rehabilitation of patients after allohernioplasty; methodological recommendations “Tactical and technical aspects of prosthetic repair for large and giant postoperative ventral hernias” have been developed (certificate of the Ministry of Health No. 08-32071 dated October 17, 2022) . The developed recommendations made it possible to optimize the tactical and technical aspects of allohernioplasty in patients with large and giant postoperative ventral hernias; The scientific results obtained were introduced into the practical activities of healthcare, in particular, in the departments of surgery of the Khorezm and Andijan regional multidisciplinary medical centers, the clinic of the Samarkand State Medical University (certificate of the Ministry of Health No. 08-32071 dated October 17, 2022). Improving the tactical and technical aspects of prosthetic repair for postoperative ventral hernias has made it possible to reduce the incidence of specific immediate complications from 40.9% to 15.6%, to reduce rehabilitation time from 8.6±2.7 to 7.1±1.5 days, and also reduce the likelihood of long-term complications from 11.7% to 3.1%. Approbation of research results. The results of this study were discussed at 8 scientific and practical conferences, including 5 international and 3 republican ones. Publication of research results. 26 scientific works have been published on the topic of the dissertation, including 9 journal articles, 4 of which in republican and 5 in foreign journals recommended by the Higher Attestation Commission of the Republic of Uzbekistan for publication of the main scientific results of doctoral dissertations. Structure and scope of the dissertation. The dissertation consists of an introduction, seven chapters, a conclusion, conclusions, practical recommendations and a list of cited literature. The volume of work is 200 pages.
Effective training is possible when the competency, practice-oriented approach, active and interactive teaching methods are used. Currently, a focus in teaching students is on the role of independent work, the organization of practice, physical training of the graduates, the fund of evaluation tools, inclusive education, quality training of the teaching staff, as well as the active and interactive teaching methods. The active and interactive methods allow sharing information, receiving feedback, solving together the arising problems, simulating the educational situations, evaluating one’s own behavior and the actions of other participants, diving into the real atmosphere of business cooperation in solving problematic issues. Various methods exist of interaction between the teacher and students: cooperative learning methods, group discussions, debates, business simulation games, case situation analysis, project method, social-psychological training, moderation, computer simulations, and others. Thanks to interactive methods, the students form the professional competences, develop analytical thinking, mobilize the cognitive powers, an interest in new knowledge is awakened, and the creativity of personality is revealed.
The article explores the role of interactive teaching methods in developing students' writing skills using a linguocultural approach. The author analyzes the effectiveness of interactive methods such as group assignments, role-playing games, and project work within the Uzbek educational context. Special attention is given to the significance of this approach in Uzbekistan's education system. The implementation of interactive methods enables the development of students' communication, creative thinking, and collaboration skills, thus fostering their writing competence at the language and cultural levels. The study emphasizes that employing a linguocultural approach not only helps students acquire writing skills but also facilitates their understanding of the deep connections between language and culture, which is crucial for preserving and advancing Uzbek cultural and linguistic identity. Based on the research findings, the author recommends integrating interactive teaching methods grounded in the linguocultural approach into Uzbek educational programs. This integration will enhance the effectiveness of teaching students' writing competence and contribute to their linguocultural development, thereby holding significant value for Uzbekistan's educational system.
Topicality and demand of the subject of dissertation. Various techniques of hybridization arc used in crop breeding, including cotton to produce a wide variability in agronomical valuable traits and develop new forms.
Regardless of its implementation hybridization process leads heredity decoding which allow the new plastic genotypes formation with an ability to change and adapt to the new conditions. Hybridization and selection arc considered as a main synthetic method of new varieties development and a success in this largely depends on the choice of crosses method and genotypes of initial forms. Therefore, there is given a special attention for studying the genetic basis and improving of hybridization methods. However, based on the most widely used of hybridization methods arc not always possible to develop varieties having high parameters of composite agronomical traits. Many developed varieties as a result of breeding methods arc genetically become homogeneous, which leads to a reduction of genetic variation and increasing of risk of cpiphytoty outbreaks and decreasing of total productivity (Boroycvich, 1981). Therefore, it is necessary to increase the genetic variability of crops’ agronomic traits by involving of original forms, as well as wild relatives of crops with genetic resistance to various stress factors, diseases and pests.
In increase cotton production through the creation of early maturing, high-yielding having good fiber yield and quality, resistant to various diseases, pests and stress factors, as well as with low level or toxic gossypol in cotton seeds still remain as critical problem in cotton production.
To overcome these problems there need to improving of genetic basis for assessment of existing donors and through the use of various hybridization methods to create new enriched genotypes, promoting positive recombination of polygene in hybrid’ organism for use in applied cotton breeding. Based on the above stated, the study of the genetic aspects of various methods of remote composite intraspecific and interspecific hybridization, based on the comparative evaluation of the effectiveness in order to isolate valuable recombinants and transgressive forms having new genetic variability of traits arc important both scientific and practical point of view.
The dissertation meets the objectives as set out in the Lows of Uzbekistan «On Seed Production» of December by 21, 2007 and «On Breeding achievements» by August 21, 2002 directed to developing and introduction of high-yielding cotton varieties, with a good yield and fiber quality, tolerance to various factors, as well as improving seed production.
Purpose of researches is comparative study of effectiveness of the various methods of intraspecific composite, convergent and inter-specific (3 to 5 species) hybridization revealing the nature of inheritance, form shaping and transgressive variation of traits, total and (+)-gossypol in creation of genetically enriched breeding material and for using in the applied cotton breeding.
Scientific novelty of the dissertation research is follows:
in the system of topcrosscs there used genetic evaluation for combining ability of main agronomic traits cotton varieties with different origins for further using in intraspecific composite and convergent hybridizations;
there established principally dominant inheritance and overdominance type of inheritance (with deviation toward the initial forms with the high agronomic traits) in F| at composite intra-and interspecific hybridization which genetically distinct accessions from the local and foreign selection and wide transgressive variability in F2-F3, facilitating to efficient selection of valuable recombinants;
first identified the inheritance nature and variability of total and (+)-gossypol in the cotton hybrids’ generative parts, developed by involving of American accessions with high (+)- gossypol and local varieties, as well as their correlation with some agronomical valuable traits;
first there held comparative study of economic traits at the different forms of amphidiploid G.thurheri x G.raimondii K-58 (hirsutum type) and K-59 (type harhadense) for free reproduction and after crossing the cultural forms of G.hirsutum L. species, it was established a wide range of variation of agronomic traits at mutant form of K-59 and composite hybrids, derived from it’s participation as compared to K-58 amphidiploid and it’s composite hybrids. It was found out those two types (type G.hirsutum K-58 and type G.harhadense K-59) of amphidiploid G.thurheri x G.raimondii at the free reproduction exhibits similarities with the both cultural tctraploid species; G.hirsutum L. and G.harhadense L., respectively. When they crossed with the cultivated G.hirsutum L. species these amphidiploid forms also behave as natural tctraploids;
it is revealed that, at the composite hybrids produced with the participation of the both forms of amphidiploid (K-58 and K-59) G.thurheri Tod. x G.raimondii Ulhr., as a result of transgressive variation, there is a disturbance of negative correlations between such traits as yield and fiber length, fineness and boll numbers conducive to positive recombinants emergence and increase donor opportunities of amphidiploids;
by comparative study of different methods of remote intra-and interspecific hybridization revealed the genetic nature of inheritance nature and variation degree of the main agronomic traits in composite hybrids, as well as their effectiveness in allocating recombinants having a new genetic variability of traits;
it is revealed that the possibility of breaking some negatively correlated traits by different methods of composite intra-and interspecific hybridization and selection of recombinants combining early maturity and high productivity, high fiber output with its quality and 1000 seed weight, etc.;
it is confirmed that the effectiveness of used methods such as a composite intraspecific and interspecific crosses, to increase positive transgressive variation and segregation genetically enriched recombinants having new combination of high levels of positive parameters of agronomic traits that were recommended and used to develop valuable initial material and new cotton varieties;
the obtained theoretical data on inheritance nature, hcritability and agronomic traits morphogenesis, levels of total and (+)-gossypol and their correlation with other agronomical valuable traits at developed hybrids could be successfully used in the field of fundamental research, and created unique hybrids, forms, progenies, lines and varieties could be used in applied cotton breeding.
Conclusion
1. There obtained and identified on comparative study base of intraspecific composed and converged hybrids with participation of six registered medium staple cotton cultivars in topcross system and high effects of GCA on the following traits:
«50%-cmcrgcncy-50 % flowering» Yulduz (-0.71); Tashkent-6 (-0.39) and in S-9070 (-0.38); “50% cmcrgcncy-50% maturing” S-9070 (-1.43), and in
Tashkent- 6 (-0.91); one boll weight S-6532 (+ 0.11); 1000 seeds weight S-9070 (+0.51); on productivity Tashkent-6 (+5,28), S-4911 (+4,04) and S-9070 (+2 24); fiber output S-6532 (+1,29); fiber length S-4911 (+0,70) and S-6532 (+0,48); fiber strength S-6532 (+1,57) and S-4911 (+0,91); micronairc S-6532 (+0,24) and Ak-Darya-6 (+0.24). These donors of high valuable traits were used by us for improving of the recurrent varieties by composite and convcrcgcnt hybridization. It was found that involvement of the varieties with a high GCA in convergent hybridization allows improving of the recurrent varieties and developing of a new initial material for cotton breeding:
inheritance nature and variability degree of agronomic traits at intraspecific composite and convergent cotton hybrids revealed the relative efficiency of the studied hybridization techniques during elaboration of new initial material with enriched genotypes of agronomic traits, and recommended to use in geneticselection process;
convergent hybrids F i dominated by early maturity, in terms of productivity and fiber output occurcd overall effect of overdominance, and F2-F3 appeared as positive transgressive forms;
significant effect of the genotype of the parental forms involved in hybridization on the inheritance nature of fiber quality (length, micronairc, strength) had convergent hybrids Fj, as well as their level of recombination in F2-F3 indicating the need for breeding of recombinants on these traits in early generations, taking into account genotype of initial forms;
the inheritance of the wilt tolcrancccs bccamcs not only depending on the pathogen load in soil fungus infections, but also depends on the used hybridization methods. Thus, most high resistance, i.c. negative superdominance on wilt tolerance observed in convergent hybrids F, and F2;
the direction and strength of correlation between the studied traits in intraspecific composite and convergent hybrids varied in depending on crosses type and from genotype of recurrent varieties. At present ease, the greatest number of recombinants with positive combination of high indicator traits which determining fiber quality, as well as its output, length, observed with with composite, particularly with convergent hybridization.
2. For the first time, on the basis of studies on determination the percentage of (+)- gossypol in seeds of genetically different cultivars of Uzbek cotton selection and analysis of variability, inheritance degree of total and (+)-gossypol in the environmentally and genetically remote hybrids and their correlations with economically valuable traits was proved:
the cultivars S-6524, S-6530 and S-6532 which were elaborated involving subspccic of G.ssp.punctatum had the highest level of (+)- gossypol and the «Turon» cultivar which was developed by composite hybridization has a low indicator of the current trait and relatively high level of total gossypol in seeds;
It was determined intermediate inheritance level of (+)- gossypol in the petals and seeds in F| hybrids and wide positive and negative transgressive variability in Ғ2-Ғ3. It was proved that the efficiency of plant selection with high (+)- gossypol in seeds since F2, that confirmed with segregation of constant progenies and lines on trait basis in F4 hybrids;
as a result of research the cross-correlation total and ( +)- gossypol and some agranomically valuable traits was found that between the ( +)- gossypol in the petals and seed exists a weak correlation. The data on correlations of studied traits showed an independent genetic control of (+)-gossypol in the generative organs and independent inheritance of them at cco- geographically and genetically remote hybridization.
3. For the first time, based on comparative study of agronomic traits of amphidiploid G.thurheri Tod. x G.raimondii Ulbr. two forms (hirsitum type -K-58 and harhadense type -K-59) and hybrids derived from G.hirsutum L. varieties revealed:
both studied forms of hirsutum type and harhadense type of amphidiploid G.thurheri Tod. x G.raimondii Ulbr., being functional diploids provided wide combinative variability in the progeny from the free reproduction and crossing with the cultivars of tetrapioid G.hirsutum L., and showed their similarity to G.hirsutum L. and G.harhadense L. tctraploid species, respectively;
as a result of the research a group of unique composite hybrids (F\G.thurherii Tod. x G.raimondii Ulbr.) x G.hirsutum L. confirmed unlimited transgressive variation as the basis of a new form revealing, new gene pool developing for use in applied cotton breeding. Herewith, at bud mutant K-59 observed emergence of phenotypes with higher variability for most agronomic traits compared to K-58;
it was found out that in composite hybrids which obtained by crossing of studied forms of G. thurberi Tod. x G. raimondii Ulbr. amphidiploids (2n=52) and with G.hirsutum L. cultivars were observed relatively rapid improvement on productivity and its components in comparison with freely propagated amphidiploids offspring. Herewith, composite hybrids involving K-58 on boll number in all generations was slower comparied to hybrids derived from K-59;
composite hybrids F, obtained involving two cultivars of cultivated forms on fiber output and length were observed deviation toward the parent with the best expression of the trait. It was revealed that the fiber output and length of the studied composite hybrids susceptible to less variability compared in terms productivity and its components. Relatively high variation was manifested on fiber output in F2, and on fiber length in F2-F3. In freely multiplying offspring of K-59 and its hybrids with varieties in F3 was observed the derivations of more long staple plants compared with hybrids, developed involving K- 58;
free propagating amphidiploids’ offsprings and composite hybrids selected by using of cultural forms showed the least wilt susceptibility compared with the control. Wilt resistance of barbadense type K-59 progenies from the free breeding was higher as compared than offspring of K-58, and higher in composite hybrids F2-F4, obtained involving K-59.
4. Under the general principle of correlation relationships among the studied hybrids were found that composite hybrids F2 amphidiploids’ G.thurberi Tod x G.raimondii Ulbr., both types (K-58 and K-59) with a G.hirsutum L. type Acala sj-5 cultivar showed mainly low positive and negative correlation coefficient values, which in most eases were none significant. In hybrid combination of K-58 x Andijan-60 fiber output and length correlated positively;
5. Based on comparative study of inheritance and variation of agronomic traits in developed 4 genomic [(G.thurberi Tod. X G.raimondii Ulbr.) X G.arhoreum L.] x G.hirsutum L., 5 - genome [(F|K-28 x S-6524 ) x G.harhadense L. hybrids and their backcross hybrids were proved:
the possibility of broad transgress variation and creation genetically enriched recombinants on unique traits;
efficiency of backcrosscs among the composite interspecific earlier generation hybrids for rapid improvement and stabilization of eultuvated forms of cotton;
wide transgress variability presence in 4 and 5 species composite hybrids and their backcross hybrids on productivity and its components starting with F|. In particular, it was confirmed the effectiveness of five species hybridization to increase the boll numbers per plant, boll weight and weight of 1000 seeds at 4 and 5 species and backcrosscs hybridization.
by obtaining recombinants having fiber output 43,1-45,0%, fiber length - 40 mm and above, micronairc of fiber 3.9-4.5 and wilt tolerance it was confirmed the effectiveness of introgressive and transgressive breeding at composite 4-5 species hybridization and their backcross hybrids.
6. As a result of studies of correlations in composite 4-5 species and backcrosscs hybridization of F2 hybrids it was revealed the effectiveness of used methods in interruption of such negatively correlated traits as «fiber output» and «fiber length» from medium positive (r=+0,39) up to high positive (r=+0,62), «fiber length» and «micronairc» -medium positive (r=+0,55), as well as «fiber length» and «fiber strength» -medium positive (r =+0,56 and r=+0.50).
7. Based on intraspecific composite and convergent, eco-geographically and genetically remote and 3-4-5 species and backcrosscs hybridizations were developed the following new breeding progenies, lines and varieties of upland cotton:
by composite and convergent hybridization way-L-7966, L-214/05; CC-896/05; CC-896/28; CC-991/05; CC-991/09; KC-1/05; КС-1/08; КС-1/18; KC-1/35; KC-1/51; KC-1/77, S-231-233/07, L-234-235/07, L-236-237/07, L-242-243/07, L-244-245/07, L-482-483/07, L-484-485/07, L-666-667/07, L-397-398/07, L-802-803/07, L-814-815/07, L-230/05;
cco- geographically and genetically distant hybridization - cultivar S-7300, S-7301, the progenies S-5344, S-5361. HPG-1;
composite 3 - specific hybridization -cultivar «Sulton», «Jarkurgan», S-7276, S-7277, as well as a number of lines;
8. Using the remote intra-and interspecific hybridization it was elaborated unique introgression hybrids, genetically enriched cotton recombinants, progenies, lines, and varieties «Sulton», «Jarkurgan», S-7276, S-7277, S-7300, S-7301 having positive combination of high agronomic traits. Cultivar «Sulton» was included in the State register from 2011 and for the period from 2008 up to 2014 it was sown on the area of over than 275,5 thousand hectares.
9. The following rcccomcndations were given for practize and future studies:
use of method convergent hybridization, allowing improving of agronomic valuable traits of recurrent parent and registered medium staple cotton cultivars and receiving a positive transgressive variability;
as an initial source in convergent crosses use cotton varieties with high General combination ability (GCA) on the following: on early maturity- Tashkent-6 and S-9070; boll weight - S-6532; weight of 1000 seeds S- 9070; on productivity -Tashkent-6, S-4911 and S-9070; fiber output -S-6532; fiber length - S-4911 and S-6532; fiber strength - S-6532 and S-4911; and for micronairc - S-6532 and Ak-Darya-6.
for use as an initial source in cotton genetics and breeding research such new cotton selection progenies as well as the lines: KS-1/05; K.S-1/08; K.S-1/18; KS-1/35; KS-1/51; and KS-1/77, L-7966, L-214/05, S-214/05, SS-896/05; SS-896/28; SS-991/05 and SS-991/09 with early maturity, productivity, wilt tolerance, fiber output and quality.
to use in cotton genetics and breeding researches both USA accessions BC3S,-47-8-l-17, BC3S|-l-3-6-15 with 95% of (+)-gossypol level in seeds and lines HPG-1 and others with 90% of (+)-gossypol level, as donors on this trait. Since 2012, developed and studied in the competitive variety testing of Institute the following lines: L-404-05 and L-6970 with high (+)- gossypol level were recommended for testing on ground control of the State Inspection Commission for Agriculture crops variety testing.
widespread use of various forms of synthetic tetrapioids G.thurheri Tod. x G.raimondii Ulbr., 4-5 species composite hybrids [(G. thurheri Tod. x G. raimondii Ulbr.) x G.arhoreum L.] x G.hirsutum L. and [(F t K- 28 x C-6524 ) x G.harhadense L., as well as their backcrosscs for achievement the broad transgress variation, elaboration genetically enriched recombinants on economically valuable traits and their use in practical cotton breeding;
to extend the areas in of early maturing commercialised cotton cultivar «Sulton» and perspective one «Jarkurgan» as well broad testing of such as new varieties S-7277, S-7300 and S-7301 in the republic.
At the time being, special attention is paid to teaching students a creative thinking in technical science in general secondary schools. This can be seen in the example of curricula, timetables and textbooks published on this subject. In particular, in the curriculum and textbooks for grades 8-9 there is a section "Technology for preparing creative projects", which helps how to perform creative work.
It should be noted that teaching pupils and students to think and work creatively is not an easy task. To do this, it is necessary periodically to inform them about creative works, methods and stages of their implementation. However, using some of the interactive methods in practice is also effective. Regarding this, to use certain interactive methods, we have created and improved several new interactive methods and applied them into a practice. We would like to recommend several interactive methods aimed at organizing and developing students' creative activities in technology classes which are given below.
Subjects of research: polynomial, interpolation and smoothing splines, cubic basic splines, methods and resources of signal processing and prediction of anomalies used in geophysics and railway systems.
Purpose of work: development of methods, algorithms and program complex for simulation of processes of processing and restoring of signals on a basis a spline - functions.
Methods of research: the theory of the functional analysis, generalized spectral methods, theory of numbers and matrixes, theory a spline of functions and simulation, theory of parallel computing processes and numerical methods of solution of simple equations.
The results obtained and their novelty: the methods and effective algorithms of calculation of signal restitution coefficients on the basis of onedimensional and many-dimensional splines arc offered; the algorithms and program complex for simulation of processes of signal processing by methods a spline - functions with application of digital data processors of signals arc developed; the spline - method of the analysis, estimation and prediction of operation stability of rails is offered.
Practical value: the software of the signals restoring with application of digital signal processors of the set Blackfin are developed; the parallel computing structure is offered on the basis of a cubic basic spline; the program complex for simulation of processes of restoring of signals by methods a spline - functions is developed.
Degree of embed and economic cffectivity: the main theoretical and practical results of dissertation work took root in the state joint-stock railway company «Uzbekistan temir yo'llari». The summarized economic benefit makes 26 mln. sum in a year.
Field of application: the methods, algorithms and software designed in dissertation work can be used in geophysics, ecology, seismology and radiolocation for signal processing, and also for problem solving of prediction of stability of rails in railway systems.
The purpose of this article is to study the possibility of effective use of interactive teaching methods in the process of forming the communicative competence of students in English lessons. The orientation towards the new educational goals should be a good knowledge of modern teaching technology using interactive technologies suitable for intensive teaching of a foreign language in the methods and forms of organizing the educational process. The combination of traditional intensive teaching methods and modern interactive methods illuminates the methods of effective teaching of a foreign language.
Research object: 126 patients: 66 of them suffered from congenital malformation development of car, 36 suffered from squarrosc auricles, 24 suffered form traumatic injury of auricles.
Purpose of research: Improvement of Reconstructive-Plastic Operations Methods at Congenital Malformation Development of Ear and at Traumatic Injury of Auricle.
Research methods: Roentgenography of mammillary processes; computer tomogram; acumctry; audiometry; anthropometric examinations; genetic examinations; examination of psycho-emotional conditions.
Received results and their novelty: A new method of plastic of external acoustic meatus has been developed and implemented into clinic practice with the help of two skin flap on feeder legs, which provides full restoration of its lining and this method eliminates postoperative complications (An acknowledgment of receipt IAP 2003 1011 has been received). Methods of Auricle correction during its squarrosc has been modified, and these methods form relief structure and eliminate wearing of fixed bandages. Methods of restoration of helix and lobule of auricle have been developed. These methods arc used to restore isolated and combined posttraumatic defects, and these methods allow to obtain satisfactory anatomic-aesthetic results (An acknowledgment of receipt IAP 2003 1010 has been received).
Practical significance of works: The developed methods of plastic operation of external acoustic meatus and of auricle provide stable clinical effect, improve cpithclization conditions and prevent from occurring of cicatricial obliterations, and provide good anatomic-functional effect, which is of high aesthetic significance.
Degree of implementation: The results arc implemented at otorhinolaryngologic clinic of Second Tashkent State Medical Institute.
Field of application: Otorhinolaryngology.
In the article, opinions are expressed about the interactive methods used in the teaching of geographical sciences and its specific features. The fact that interactive methods of teaching geography help to increase the creative, cognitive and educational activity of students is methodologically based on the practice of passing the topic "Natural resources of the Republic of Uzbekistan".
The article deals with the issues based on the efficiency of using interactive strategies in teaching. Innovative activity implies a creative approach of the teacher to the acquisition of existing forms and means of professional development. It should also be acknowledged that the stable and universally accepted scientific ideas and classifications of innovations in education and innovative pedagogical activity have not yet been perfectly formed. Interactive methods are also important because the teacher never rejects the student's point of view, but only gives the correct conclusion in time. As a result, the student understands the mistake. This prevents them from becoming depressed, braking in thinking. Interactive methods are based on mutual respect between the student and the teacher. The teacher listens to the student’s point of view anyway and expresses respect, while also teaching students to listen to each other.
The teaching method is one of the basic categories of teaching methods. In the general didactic sense, the concept of a method includes the methods of interrelated activities of the teacher and students, aimed at achieving the goals of education, upbringing and development of students. In this understanding, the methods can be universal, applicable to teaching different disciplines, although they have their specific embodiment in each discipline. For a language teacher, methods are important as sources of knowledge, skills and abilities formation. These methods include: working with a text, a book, a teacher's story, conversation, excursion, exercises, the use of visualization in teaching. Depending on the independence of educational actions performed by students, active and passive methods are distinguished; by the nature of the work of students - oral and written, individual and collective, classroom (classroom) and home.